Quick Info - Si-tex SNS-1100 User Manual

Fig. 4.3a - External route on Route Data Report
• Cruising Speed: Planned Cruising Speed (from $PCMPN,1)
• Total Route length: Length from First to Last Wpt (from $PCMPN,1)
• Waypoints in Route: No. of Wpts in the Route (from $PCMPN,1)
• Remaining Waypoints: No. of Wpts from Dest to Last Wpt (from $PCMPN,1)
• Fuel Consumption Rate: Planned Fuel Consumption Rate (from $PCMPN,1)
• Total Fuel Consumption: Calculated Fuel consumption to navigate the whole Route
• Initial Fuel Load: Volume of Fuel available before the navigation was started (Liters)
• Remaining Fuel: Volume of Fuel available (Liters)
• Distance to Destination: Distance from Ship to Destination (calculated)
• Distance to Next Wpt: Distance to travel from ship to the Wpt after the Destination (calculated:
Distance to Dest + Next Route Leg length)
• Distance to Last Wpt: Distance to travel from ship to the End of the Route (calculated:
Distance to Dest +Distance From Dest to last Wpt received from $PCMPN,1)
• TTG To Destination: Estimated Time to travel the "Distance to Last Wpt" (calculated using
Cruising Speed)
• TTG To Next Wpt: Estimated Time to travel the "Distance to Next Waypoint" (calculated using
Cruising Speed)
• TTG to Last Wpt: Estimated Time to travel the "Distance to Last Wpt" (calculated using
Cruising Speed)
• ETA to Destination: Estimate Time of Arrival to the Destination Point (calculated: Current
Time + "TTG To Destination")
• ETA to Next Waypoint: Estimate Time of Arrival to the Waypoint after the Destination
(calculated: Current Time + "TTG To Next Waypoint")
• ETA to Last Wpt: Estimate Time of Arrival to the End of the Route (calculated: Current Time
+ "TTG To Last Wpt")
4.4 QUICK INFO
Route Navigation: Quick Info on the Destination
Fig. 4.4a - Quick Info on Single Destination
User Manual - 67