Si-tex SNS-1100 User Manual page 46

Attention Sets On/Off the displaying of Attention Areas (areas in which special attention
Areas by the mariner is required, because of natural or man-made hazards, or
sailing regulations and restrictions. Moreover a special symbol (!) is placed
inside the area selecting On option. This is valid also for the categories:
FISHING FACILITY, MARINE FARM/CULTURE, MILITARY PRACTICE AREA,
RESTRICTED AREA, SEAPLANE LANDING AREA. When the area is small, it
is identified only by the boundary).
Tides & Sets On/Off the displaying of the Tides and Currents. When data/time is
Currents available, Tidal stream arrows are shown on the charts, indicating the direction
and strength of the Tide. If no data/time is available from the GPS or the chart
plotter is not in Simulation mode, the icon on the map is generic one. The color
of the arrow denotes the strength of the current as follows:
When the chart plotter receives a valid position fix, the Tide icons are shown
on the charts on the basis of the current date and time: the screen displays
and changes arrows as date/time changes.
Seabed Type Sets On/Off the displaying of the Seabed Type.
Ports & Sets On/Off the displaying of the Ports and Services (areas along shore with
Services facilities for mooring, downloading and uploading of ships, generally sheltered
from waves and winds. Port installations are piers, wharves, pontoons, dry
docks, cranes...).
Tracks & Sets On/Off the displaying of the Tracks and Routes (recommended and
Routes established routes for ships at sea, including traffic separation schemes, deep
water routes).
Depth Settings
To control the display on the map of the depth informations.
Depth Range Min
Depth Range Max
Land Settings
To control the display on the map of the terrestrial features.
Land Elevation
Land Elevation values
Roads
POI
Chart Settings
To control the display on the map of the chart features.
46 - User Manual
Sets a minimum reference for the Depth Areas.
Sets a maximum reference for the Depth Areas.
Sets On/Off the Land Elevation display.
Sets On/Off the displaying of the Land Elevations values.
Sets On/Off the displaying of the Roads.
Sets On/Off the displaying of Points Of Interest.