Procedure 2.3 - Accessing The Set User Parameters Display - Precor EFX 5.17i Service Manual

Procedure 2.3 - Accessing the Set User Parameters Display

Selecting United States standard units causes information to be displayed in miles. Information is
displayed in kilometers if metric units are selected. After you select a measurement standard, the
software accumulates and records workout information in the units of the measurement standard
selected.
Procedure
1. Plug the power cord into the wall outlet, then turn on the EFX 5.17i with the on/off switch.
With the PRECOR EFX 5.17i banner displayed, press keys RESET,5,6,7,1, sequentially.
2.
The display name "SELECT UNITS" will be scroll.
3.
One of two measurement standards will be displayed, U. S. Standard or Metric.
4.
If U. S. Standard is selected, weights will be in pounds and distances will be in miles. If
5.
Metric is selected, weights will be in kilograms and distances in kilometers.
Pressing any arrow key will toggle the units of measure between US Standard and Metric.
6.
Press the ENTER key to save the currently displayed selection and exit the set user
7.
parameters display or press the RESET key to leave the selection unchanged and exit the
set user parameters display.
5.17i Elliptical Fitness Crosstrainer
Page 9