D-Link DSL-2870B Dual Band Wireless N750 Gigabit VDSL2+/ADSL2+ Modem Router User Manual
Add IPv4 Routing
IPv4 Routing
Click the
button to access the
IPv4 Routing
After clicking the
button the following page is available.
Enable Routing Rule: Enable or disable the routing rule for this router.
Destination Address: Enter a destination address for the routing rule.
Destination Subnet Mask: Enter a subnet mask address for the routing rule.
Interface: Specify the interface for this routing rule.
Gateway IP address: Specify gateway IP address for this routing rule.
Click Apply button to commit the configuration.
In this section, a list of IPv4 static route entries will be displayed.
Click the Remove Selected button to remove the selected entry.
IPv4 Routing
configuration page.
Page 90