D-Link DSL-2870B User Manual page 29

D-Link DSL-2870B Dual Band Wireless N750 Gigabit VDSL2+/ADSL2+ Modem Router User Manual
Step 3: CONFIGURE YOUR INTERNET CONNECTION
In this step, the user can configure the Internet connection settings used by this
router.
In this section, we can configure the following parameters.
WAN Mode: In this drop-down menu, the user can select WAN mode. They are
ADSL Router, VDSL Router and Residential Gateway (NBN/UFB Mode).
Country: In this drop-down menu, the user can select the country options. It is
New Zealand. To manually configure this connection, the user can choose
the third option called Other.
Internet Service Provider: After selecting a country, in the previous option, a list
of ISP connections will be available here. If your ISP is in the list, select it here
and the correct parameters will be entered for the rest of the page. However,
if your ISP is not listed here, you can choose the Other option.
Protocol: Select the appropriate protocol to use here. Options to choose from are
Dynamic IP Address, Static IP Address, PPPoE and Bridge Mode.
WAN Type: Select the appropriate WAN type to use here. Options to choose from
are Default and VLAN-Mux.
VLAN ID: Enter the VLAN ID value for your ISP here.
VLAN Prio: Enter the VLAN Prio value for your ISP here.
MTU: Enter the maximum transmission unites.
Click the Prev button to discard the changes made and return to the previous page.
Click the Next button to continue to the next page.
Click the Cancel button to discard the changes made and return to the main page.
SET PPPOA
In this section, we can enter PPPoA information provided to you by your ISP.
User Name: Enter the user name.
Password: Enter the password.
Confirm Password: Enter the confirm password.
Click the Prev button to discard the changes made and return to the previous
page.
Click the Next button to continue to the next page.
Page 29