D-Link DSL-2870B User Manual page 51

D-Link DSL-2870B Dual Band Wireless N750 Gigabit VDSL2+/ADSL2+ Modem Router User Manual
In this section, we can configure the IP Settings parameters.
Advanced Settings: Select this option to enable the Advanced Settings option.
IP Address: Enter the local IP address for this router here. The IP address is also
used to connect to this device's Web User Interface. Please note that after
changing the IP address you will be forced to log into the Web User Interface
again, using the new IP address.
Subnet Mask: Enter the subnet mask used here.
IGMP Snooping: Select this option to enable the IGMP snooping option.
Snooping Mode: Options to choose from are Standard and Blocking.
Click the Apply button to accept the changes.
In this section we can configure the DHCP Server parameters.
DHCP Server: Options to choose from are Disable, Enable and Relay.
Start IP Address: Enter the start IP address.
End IP Address: Enter the end IP address
Lease Time: Set the lease time.
WAN DHCP Server IP Address: Enter the WAN DHCP server IP address.
Click the Apply button to accept the changes.
In this section, we can configure the ADD Static IP Address parameters.
MAC Address: Enter the MAC address.
IP Address: Enter the IP address.
Click the Apply button to accept the changes.
Page 51