D-Link DSL-2870B User Manual page 78

D-Link DSL-2870B Dual Band Wireless N750 Gigabit VDSL2+/ADSL2+ Modem Router User Manual
Protocol: Select protocol for this QoS classification, only select IP (0x800) and
IPv6 (0x86DD), this option can be operated, options includes TCP, UDP, ICMP
and IGMP.
In this section, we can assign QoS classification to a queue and mark DSCP, 802.1p
priority, VLAN ID and specify rate limit for this QoS classification.
Assign Classification Queue: Set the Assign Classification Queue field depending
on your type of connection.
Mark Differentiated Service Code Point (DSCP): the DSCP value that will be set
by the traffic class rule.
Mark 802.1P Priority: In the scale from 0 -7, 0 is best effort, 6 and 7 are reserved.
Tag VLAN ID: Set the Tag VLAN ID for the LAN egress traffic.
Rate Limit: Set the Rate Control if you wish to have a limit to the bandwidth, or else
leave this field blank.
Click the Apply button to accept the changes made.
Click the Cancel button to cancel the operation.
In this section, we can enable Switch Settings and configure it.
Schedule: Configure the Queue Type that will be applied on the ether switch.
Combo type: If on you set Queue type to SP+WRR combo, this setting will be
display.
Click the Apply button to accept the changes made.
Page 78