D-Link DSL-2870B User Manual page 43

D-Link DSL-2870B Dual Band Wireless N750 Gigabit VDSL2+/ADSL2+ Modem Router User Manual
Add Wireless Device with WPS
The Wireless Device, with WPS, Wizard is designed to assist the user in configuring
a connection between this router and a wireless client by means of the WPS wireless
connection method.
In this section, we can configure the following parameters.
Enable: Tick this option to enable the WPS feature.
Disable WPS-PIN Method: Tick this option to disable the WPS-PIN Method.
Current PIN: Here a PIN number will be displayed that we can use for the WPS
connection. To generate a new PIN number, click on the Generate New PIN
button. To reset this option, click on the Reset PIN to default button.
Wi-Fi Protected Status: Here the Wi-Fi Protected Status will be displayed. By
default, this option is 'Configured'. To reset this option to 'Unconfigured', click
on the Reset to Unconfigured button.
Click the Add Wireless Device with WPS button to initiate the wizard.
After click the Add Wireless Device with WPS button, the following page will be
available.
PIN: Enter its PIN number below to add this device to your wireless network.
Virtual Push Button: If the wireless device you are adding to your wireless network
has both options available, you may use the Virtual Push Button if you prefer.
Page 43