Resetting The Scanner - Uniden EZI33XLT Owner's Manual

TROUBLESHOOTING

RESETTING THE SCANNER

If the scanner's display locks up or stops operating properly,
you might need to reset the scanner.
CAUTION:
This procedure clears all the information you have stored in
the scanner. Before you reset the scanner, try turning it off and
on to see if it begins working properly. Reset the scanner only
when you are sure it is not working properly.
1.
2.
UNIDEN EZI33XLT
UB366AV_EZI33XLT_0119.indd 24 UB366AV_EZI33XLT_0119.indd 24
Turn off the scanner.
While holding down
It takes about 1 second to initialize and CLEAR appears.
, turn on the scanner.
and
24
Scanner
2012/01/19 20:58:20 2012/01/19 20:58:20