Repairs; Birdies; Resetting The Scanner (Clearing All Memories); Technical Specifications - Uniden BC365CRS Owner's Manual

REPAIRS

Do not attempt any repair. The scanner contains no user serviceable parts.
Contact Uniden Customer Care or take it to a qualified repair technician.

BIRDIES

All radios can receive "birdies" (undesired signals). If your scanner stops
during Scan mode and no sound is heard, it might be receiving a birdie. Birdies
are internally generated signals inherent in the electronics of the scanner.
Press L/O to lock out the channel.

RESETTING THE SCANNER (CLEARING ALL MEMORIES)

To reset the scanner to factory defaults, disconnect power to the scanner and
remove any batteries if they are installed.. Then, while holding down 2, 9, and
HOLD, reconnect power to the scanner. All scanner memory contents are
erased and the band plan resets to USA.
Certificated accordance with FCC Rules and Regulations Part 15 Sub-part C
as of date of manufacture.

TECHNICAL SPECIFICATIONS

Band Coverage
Weather Service Channel
Sensitivity (nominal) 12dB SNAD : 0.4 µV 25.0050 MHz
Channels
Scan Rate
Search Rate
Time Accuracy
: USA - 12 Bands
: Canada - 12 Bands
: 162.4000 MHz
162.4250 MHz
162.4500 MHz
162.4750 MHz
162.5000 MHz
0.3 µV 40.8400-53.9800 MHz
0.5 µV 88.1000-107.5000 MHz
0.4 µV 118.8000-135.5000 MHz
0.3 µV 138.1500 MHz
0.2 µV 162.4500 MHz
0.3 µV 173.2250 MHz
0.4 µV 225.0500-315.0500 MHz
0.4 µV 325.0500 MHz
0.3 µV 406.8750-511.9125 MHz
: 500 (50 channels x 10 Banks)
: Up to 90 channels per second
: Up to 90 steps per second (Up to 270 steps
per second at 5 kHz step)
: +/ 20 seconds per month at normal
−
162.5250 MHz
162.5500 MHz
27