Steering Column - Toro GroundsmasterR 4300-D Service Manual

Steering Column

Antiseize
Lubricant
84 to 120 in- -lb
(9.5 to 13.5 N- -m)
Antiseize
Lubricant
8
2
22
14
7
13
15
1. Steering column
2. Hydraulic fitting (4 used)
3. Steering wheel
4. Steering wheel cover
5. Gear pump
6. Socket head screw (4 used)
7. Flange nut
8. O- -ring
Removal (Fig. 3)
1. Park the machine on a level surface, engage the
parking brake, lower the cutting decks and stop the en-
gine. Remove the key from the ignition switch.
2. Remove cover from steering wheel by carefully pry-
ing up on one of the cover spokes.
Chassis
1
6
17
19
19
7
18
9. Hydraulic tube
10. Hydraulic tube
11. Hydraulic tube
12. Hydraulic tube
13. Column brace
14. Steering control valve
15. Flange head screw (2 used)
16
5
10
9
Figure 3
3. Remove lock nut and flat washer that secure steer-
ing wheel to steering column.
4. Use a suitable puller to remove steering wheel from
steering column.
Page 6 - - 6
4
20 to 26 ft- -lb
20
(28 to 35 N- -m)
21
3
11
12
16. Flange head screw (2 used)
17. Socket head screw (4 used)
18. Flange nut (2 used)
19. Tube clamp
20. Lock nut
21. Flat washer
22. O- -ring
Groundsmaster 4300--D
RIGHT
FRONT