Console - Tunturi C30 Owner's Manual

Hide thumbs Also See for C30:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
heART RATe in TRAining
First find your maximum heart rate i.e. where the rate
doesn't increase with added effort. If you don't know your
maximum heart rate, please use the following formula as
a guide:
The formula gives an average value; the maximum varies
from person to person. The maximum heart-rate diminishes
on average by one point per year. If you belong to a risk
group, ask a doctor to measure your maximum heart rate
for you.
We have defined three different heart-rate zones to help
you with targeted training.
BEGINNER: 50-60 % of maximum heart-rate
Also suitable for weight-watchers, convalescents
and those who haven't exercised for a long time.
Three sessions a week of at least a half-hour each is
recommended. Regular exercise considerably improves
beginners' respiratory and circulatory performance and
you will quickly feel your improvement.
TRAINER: 60-70 % of maximum heart-rate
Perfect for improving and maintaining fitness. Even
reasonable effort develops the heart and lungs effectively,
training for a minimum of 30 minutes at least three times a
week. To improve your condition still further, increase either
frequency or effort, but not both at the same time!
ACTIVE TRAINER: 70-80 % of maximum heart-rate
Exercise at this level suits only the fittest and presupposes
long-endurance workouts.

COnsOle

KeYs
1. SELECTION DIAL
The selection dial functions in two ways:
A) Rotating the dial (+ / -). By rotating the dial clockwise,
you can scroll the menus to the right, and increase values
C30_Manual_090520.indd 4
220 - Age
or resistance. By rotating the dial counter-clockwise, you
can scroll the menus to the left, and decrease values or
resistance.
B) Pressing the dial (ENTER). By pressing the dial, you can
accept the selection you made when rotating the dial.
2. RESET
Single push: return to the program menu. Long push:
restarts the meter.
3. RECOVERY
Calculates your recovery heart rate index.
4. BODY FAT
Calculates your body mass index (BMI) and shows your
body fat %.
5.OFF
Puts the meter immediately to the sleep mode.
DisPlAY
Time (mm:ss), speed (km/h or ml/h), RPM (revolutions per
min), distance (km or ml), energy consumption (kcal),
power(W) and heart rate (bpm) are displayed.
PROgRAMs
1. MANUAL PROGRAM
Set target time and/or distance and/or energy
consumption and/or upper heart rate limit by using the
SELECTION DIAL.
Start training by pressing START/STOP button.
If you have set target/targets, the target/targets start to
count down. Adjust resistance with SELECTION DIAL.
2. PRESET PROGRAMS
Preset program profile is shown for two seconds while
programs are browsed. Select desired preset program by
using the SELECTION DIAL.
Set time for training and/or target distance and/or energy
and/or upper heart rate limit by SELECTION DIAL.
Start training by pressing START/STOP button.
If you have set target/targets, the target/targets start to
count down. During training you can scale the load by
SELECTION DIAL.
3. USER PROGRAM
The program profile used last time is displayed. You can
either start training with your personal memorized training
targets by pressing START/STOP or modify the program.
The program profile bar (1/20) that can now be modified
blinks. If you want to change, modify the blinking bar and
confirm. Next bar will blink. After the last bar, the display
switches back to the first bar. By pressing the ENTER button
for 2 seconds you can finish the profile modifying. Now
program is ready with your memorized personal training
data (time, distance, energy targets and heart rate limit).
Modify your targets if needed. Start training by pressing
START/STOP button.
If you have set target/targets, the target/targets start to
count down. During training you can scale the load by
SELECTION DIAL
4. HEART RATEATE CONTROL (H.R.C.)
Select between four different training intensities (55%, 75%,
90% or TARGET). By selecting TARGET you can insert target
heart rate.
Start training by pressing START/STOP button.
During the training the equipment will automatically adjust
the resistance so that your target will be reached and
maintained.
4
5/20/2009 12:56:19 PM

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Cross 3.0

Table of Contents