Changing The Display Language [Language]; Setting The Voice Guidance [Voice Guide]; Selecting The Speaker Output [Speaker] - Olympus DM-7 User Manual

LCD/Sound menu [LCD/Sound Menu]
Changing the display language
[Language]
You can select the language used in the voice
recorder's displays.
• [Čeština] [Dansk] [Deutsch] [English]
[Español] [Français] [Italiano]
[Nederlands] [Polski] [Русский]
[Svenska].
TIP
• The language selections vary
depending on where the voice recorder
was purchased.
Setting the voice guidance
[Voice Guide]
This feature gives voice announcements of
recorder operating conditions.
See "Setting the voice guidance [Voice
Guide]" (☞ P.99) for the procedure.
Selecting the speaker output
[Speaker]
You can set the built-in speaker to be ON or
OFF when the earphones are not connected.
[On]:
When the earphone is connected,
sound is output from the earphone
and when the earphone is
disconnected, sound is output from
the built-in speaker.
[Off]:
Sound is not output from the built-in
speaker even though the earphone is
disconnected.
5
EN
81