Setup Flow For User Management Setting - Toshiba e-studio 2500c Quick Start Manual

Setup Flow for User Management Setting

When you want to manage the authentication for each individual user, enable the User Manage-
ment Setting.
This equipment supports the following methods for the User Management Setting.
Windows Domain Authentication
When you network manages the network users using the Windows Domain, this equipment
can be managed using the Windows Domain Authentication.
When this is configured, users must enter the user name and password that is registered in
the Windows Domain to perform the any operations on the Control Panel of this equipment.
LDAP Authentication
When you network manages the network users using the LDAP, this equipment can be man-
aged using the LDAP Authentication.
When this is configured, users must enter the user name and password that is registered in
the LDAP server to perform the any operations on the Control Panel of this equipment.
MFP Local Authentication
When you do not have any network authentication systems in your network, you can use the
MFP Local Authentication.
When this is configured, users must enter the user name and password that is registered in
the MFP to perform the any operations on the Control Panel of this equipment.
Setup Flow
Configure Network
Authentication Service
(Optional)
Configure Role Based
Access Control (Optional)
Enable User Manage-
ment Setting
Register User Information After enabling the User Management Setting, register the User Information.
Description/Reference
Make sure that the Network Authentication Service is configured correctly in
the network server if you use Windows Domain Authentication or LDAP
Authentication.
If the LDAP authentication is used, some settings will be required in the net-
work server and the equipment. For information about setting up the LDAP
authentication, please see the following section.
Reference: Network Administration Guide
- Chapter 1 "SETTING UP NETWORK SERVER"
"Setting up LDAP Authentication Service"
Configuring the Role Based Access Control in the LDAP server if the Role
Based Access Control is enabled.
Reference: Network Administration Guide
Chapter 1 "SETTING UP NETWORK SERVER"
"Setting up Role Based Access Control"
Enable the User Management Setting that is suited to your network.
Reference: User Management Guide
Chapter 1 "Setting up User Management"
"Setting up User Management Setting"
"Enabling User Management Setting"
Reference: User Management Guide
Chapter 1 "Setting up User Management"
"Setting up User Management Setting"
"Managing User Information"
SETUP FLOW FOR USER MANAGEMENT 37