Pride Mobility QUANTUM 600 SPORT HD Owner's Manual page 25

Power Elevating Seat Installation
Your power chair may be equipped with the power ele-
vating seat option. While the seat itself may be any one
of the styles offered for this model, the way the seat
base attaches to the power base is different.
To install the power seat:
l. Place the seat plate interface bracket onto the actu-
ator. See figure 14.
2. Insert screws into the actuator and insert and
tighten the hardware.
3. Place seating system onto the seat plate interface
bracket and secure.
Transit Securement System (Optional)
If your power chair is equipped with a transit secure-
ment system, it is equipped with manufacturer-
installed front and rear securement brackets. If the
transit securement system is rated for occupied use, it
will also be equipped with positioning belt anchoring
brackets. See figure 15. Refer to the supplement pro-
vided with your power chair for information on how to
use the transit securement system.
SEAT PLATE INTERFACE BRACKET
ACTUATOR
Figure 14. Power Seat Actuator
Quantum 600 Sport HD
I V . A S S E M B L Y
www.pridemobility.com
WIRE TIES
WIRE TIES
TO POWER BASE
Figure 13. Controller Routed on a Contour Seat
POSITIONING BELT ANCHORING
BRACKET LOCATION (1 OF 2 SHOWN)
Figure 15. Transit System Securement Brackets
SECUREMENT
BRACKETS
(3 OF 4 SHOWN)
25