Preset - D-Link DCS-960L User Manual

Section 4: Configuration
This screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable area by
using a zoomed view. Presets allow you to quickly go to and view a specific part of the area your camera is covering, and you can create preset
sequences, which will automatically change the camera's view between the different presets according to a defined order and timing you can set.
ePTZ Enable: Check this box to enable the ePTZ function.
ePTZ Speed: You may select a value between 0 and 10. 0 is the slowest
and 10 is the fastest.
Controls:
Use these buttons to move to a specific part of the viewing
area, which you can then set as a preset. Click the Home
button to return to the center of the viewing area.
Input Preset Name:
Enter the name of the preset you want to create, then click
the Add button to make a new preset. If an existing preset
has been selected from the Preset List, you can change its
name by typing in a new name, then clicking the Rename
button.
Preset Position:
Click this drop-down box to see a list of all the presets that
have been created. You can select one, then click the GoTo
button to change the displayed camera view to the preset.
Clicking the Remove button will delete the currently
selected preset.
D-Link DCS-960L User Manual

Preset

31