Section 4: Configuration
Step 1
The Motion Detection Setup Wizard will guide you through a step-by-step process
to configure your camera's motion detection functions.
Click Next to continue.
Step 2
This step will allow you to enable or disable motion detection. You may draw
areas for your camera to monitor for motion.
1. Check the Enable Video Motion box.
2. Select Draw motion area and use your mouse to click and drag on the
area that you would like to monitor for motion.
3. Enter the sensitivity. Higher the number the more sensitive the detection
of movement will be.
4. You can select Erase motion area and erase areas if needed. Click Clear
if you want to erase the area.
5. Click Next to continue.
Refer to "Motion Detection" on page 33 for details about how to specify the
detection sensitivity and adjust the camera's ability to detect movement.
D-Link DCS-960L User Manual
Motion Detection Setup Wizard
22