Safety Instructions For The Installer; Installation Instructions - AEG Electrolux COMPETENCE B 8139-5-m User Instructions

Safety Instructions for the Installer

!
• Legal regulations and the local electricity board's requirements for
making connections must be observed in full.
• When connecting, repairing and replacing the oven light bulb, isolate
the appliance from the electricity supply.

Installation instructions

• Full protection against electric shocks must be ensured by the
method of installation.
• The protective earth conductor must be long enough so that, if the
strain relief device fails, it is not subjected to tension until after the
live conductors of the connection cable.
• If you want to install the oven in the corner of an L-shaped kitchen
so that the left side of the oven is flush with the other kitchen line,
there must be a space of at least 15 cm between the left side of the
oven and the other line front.
• In accordance with heating testing standards, the appliance corre-
sponds to Safety Class Y.
• The furniture into wich the oven is to be installed must be tempera-
ture resistant to 100°C. This applies in particular to veneer, edging,
plastic surfaces, adhesives and lacquers. The fronts of the surrounding
furniture must be temperture resistant to at least 70°C.
• The appliance is to be installed flush with the wall. The appliance
mains socket must therefore be located outside the installation area.
• It is imperative to install the appliance horizontally on an even sur-
face. This surface must not bend.
• If the furniture unit is not attached to the wall, attach it using a con-
ventional fixing angle.
INSTALLATION INSTRUCTIONS
55