How to set the electronic timer
Selecting the timer operation:
�
Press the selector button for the operation you wish to use. The lamp
above the button you have pressed will start to flash and a number will
appear in the display.
Amending the operation:
�
Adjust the value shown, using
Starting the operation:
• If you do not press another button for 3 seconds, the operation will
commence automatically and the lamp will stay on all the time.
• You can reduce the time by pressing a selector button:
• - the previously selected button confirms the input and starts the
operation.
• - another button confirms the input and selects the new operation
you have chosen.
Setting the oven functions (switching functions only):
�
Use P to select the mode and R to select the temperature.
Tip: If you wish, you can set the temperature and mode before pro-
gramming the timer.
Changing the setting
�
If you wish to alter a setting you have made – even if the operation is
running – push the appropriate button again and use "+"/"-" to change
the value in the display.
OPERATING INSTRUCTIONS
17