Toa F-1000BTWP EB-Q Instruction Manual page 9

Step 3. Mount the speaker to the joint bracket by inserting the speaker bracket into the joint bracket and
loosely securing the fixing bolt for temporary speaker installation.
Step 4. Use the supplied terminal cover when connecting the speaker cable to the input terminal.
Note: Refer to p. 4 for wiring and using terminal cover.
Step 5. Adjust the speaker's vertical mounting angle and tighten the fixing bolt.
The speaker angle is adjustable in 7.5º steps.
Note
The mating surfaces of the speaker bracket and joint bracket are designed to interlock. Ensure that
both parts are securely engaged with each other after mounting is complete.
Cluster configuration assembly
Use the supplied joint brackets and speaker brackets in combination
with the optional HY-CL10B (F-1000 or F-1300 series),
HY-CL20B (F-2000 series) Cluster Bracket to permit a total of 4
speakers to be suspended from the ceiling as shown in the figure at
right.
Refer to the instruction manual enclosed with the optional mounting
bracket for its mounting details.
[Installation example]
9