Name And Functions Of Indications On Remote Controller; Transmission Mark; Fan Speed Display; Eco Timer Display - Toshiba RAS-13UKV-E Service Manual

8-6-2. Name and Functions of Indications on Remote Controller

[Display]
All indications, except for clock time indication, are indicated by pushing the START/STOP button.
1

Transmission mark

This transmission mark
remote controller transmits signals to the indoor
unit.
2
Mode display
Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover
control, : Cool,
: Fan only)
3
Temperature display
Indicates the temperature setting (17°C to 30°C).
When you set the operating mode to
no temperature setting is indicated.
4
Louver operation display
Indicates the louver positioning and operation.
Five selectable positions
Automatic Swing
5

FAN speed display

Indicates the selected fan speed. AUTO or one of
five fan speed levels (LOW
MED , MED +
indicated.
Indicates AUTO when the operating mode is
either AUTO or : Dry.
3 1 2 8
AUTOA
HiPOWER
CHK
AUTO
9 7
• In the illustration, all indications are indicated for explanation.
During operation, only the relevant indications will be indicated on the remote controller.
indicates when the
: Dry, : Heat,
: Fan only,
, , , ,
.
, LOW + ,
, HIGH ) can be
4
AM
:
PM
P ON
OFF
C
˚
AM
:
PM
5 6
6
TIMER and clock time display
The time set for timer operation or clock time is
indicated.
The present time is always indicated except for
TIMER operation.
7
Hi-POWER display
Indicates when the Hi-POWER operation starts.
Push the Hi-POWER button to start and push it
again to stop the operation.
8
P (MEMORY) display
Flashes for 4 seconds when the MEMO button is
pushed during operation.
mark is indicated when keeping the button
P
depressed for more than 2 seconds while the
mark is flashing.
Push another button to turn off the mark.
9

ECO TIMER display

Indicates when the ECO TIMER is in operation.
Each time you push the ECO button, the display
changes in the sequence of 1, 3, 5, or 9h.
AUTO
AUT
– 33 –
OFF
:
PM
UTO