Sony SLV-LX500 Service Manual page 7

QQ
3 7 63 1515 0
Hookup 1 : VCR setup
Plug the VCR into the AC outlet.
The VCR automatically presets the TV channels when the VCR is plugged into
the AC outlet.
AC power cord
to AC outlet
The VCR starts presetting the channels.
You have now completed VCR setup.
To change the on-screen display language, see "Step 5 : Selecting a language" on
page 18.
To add or disable channels manually, see "Presetting/disabling channels
manually" on page 21.
Notes
• If you connect the AC power cord before the antenna connections are completed, the
channels may be incorrectly set. If this happens, see "Step 6 : Presetting channels" on
page 19.
• Do not press any buttons on the VCR or remote commander during Auto preset.
• Auto preset starts automatically only when you plug in the AC power cord for the first time
after you purchase the VCR.
• Auto preset can be performed by pressing x STOP (parada) continuously for 5 seconds or
more with the VCR power turned off.
TE
L 13942296513
12
Hookups
Hookup 2 : VCR setup
Plug the VCR into the AC outlet.
The VCR automatically presets the TV channels when the VCR is plugged into
the AC outlet.
AC power cord
to AC outlet
The VCR starts presetting the channels.
You have now completed VCR setup.
To change the on-screen display language, see "Step 5 : Selecting a language" on
page 18.
To add or disable channels manually, see "Presetting/disabling channels
manually" on page 21.
Notes
• If you connect the AC power cord before the antenna connections are completed, the
channels may be incorrectly set. If this happens, see "Step 6 : Presetting channels" on
page 19.
• Do not press any buttons on the VCR or remote commander during Auto preset.
• Auto preset starts automatically only when you plug in the AC power cord for the first time
after you purchase the VCR.
• Auto preset can be performed by pressing x STOP (parada) continuously for 5 seconds or
more with the VCR power turned off.
www
.
14
Hookups
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Hookup 2 (Plug and Play (enchufar y ajustar))
You have no cable box, or a cable box with only a few
scrambled channels
Recommended use
Use this hookup if you do not have a cable box. Also use this hookup if your cable
system scrambles only a few channels.
What you can do with this hookup
• Record any unscrambled channel by selecting the channel on the VCR
What you cannot do
• Record scrambled channels that require a cable box
Wall
Connect this cable
directly to your TV if
you do not have a
cable box.
Q Q
3 6 7 1 3 1 5
Hookup 3
Connecting a cable box with many scrambled channels
Recommended use
Use this hookup if your cable system scrambles all or most channels.
What you can do with this hookup
• Record any channel by selecting the channel on the cable box
What you cannot do
• Record with the cable box turned off
• Record one channel while watching another channel
Wall
VCR
IN
After you have completed hookup...
After you have completed hookup, plug the VCR into the AC outlet and see
"Step 5 : Selecting a language" on page 18.
co
AC power cord
to AC outlet
.
1-3
9 4 2 8
VCR
Rear of TV
VHF/UHF
IN
A
OUT
or
VHF
B
UHF
or
VHF
Cable box
C
IN
UHF
OUT
0 5 8 2 9 9 4 2 8
Cable box
Rear of TV
VHF/UHF
IN
Match the type of
A
OUT
connector on your
or
TV: A, B, or C.
VHF
B For connector
types B and C, no
UHF
or UHF connection
is required.
VHF
C
UHF
OUT
m
9 9
Match the type
of connector
on your TV: A,
B, or C.
For connector
types B and C,
no UHF
connection is
required.
continued
9 9
13
Hookups
15
Hookups