Table of Contents
Advertisement
QQ
3 7 63 1515 0
Step 3 : Hookups
Selecting the best hookup option
There are many ways in which your VCR can be hooked up. To hook up your VCR
so that it works best for you, first scan through the table below. Then use the
accompanying diagrams and procedures on the following pages to set up your VCR.
If your TV has audio/video inputs, refer to pages 9 and 10 for audio/video (A/V)
hookup. Then follow one of the hookups below. If your TV does not have A/V
inputs, do directly to one of the hookups below.
If you have
Antenna only, no cable TV
No cable box or cable box with only a
few scrambled channels
Cable box with many scrambled
channels
After you have completed the connections, follow the instructions for setup.
After you have completed the setup, you are ready to use your VCR. Procedures
differ depending on the hookup you used. For an overview, refer to "Quick reference
to using the VCR" on the back cover.
Before you get started
• Turn off the power to all equipment.
• Do not connect the AC power cords until all of the connections are completed. If
you connect the AC power cord before the connections are completed, you may not
be able to use the Plug and Play (enchufar y ajustar) function.
• Be sure you make connections firmly. Loose connections may cause picture
distortion.
• If your TV does not match any of the examples provided, see your nearest Sony
dealer or qualified technician.
TE
L 13942296513
8
Hookups
For SLV-LX500
A Use this hookup if your TV has stereo jacks
VCR
AUDIO
OUT
IN
VIDEO
Audio/video cable (not supplied)
B Use this hookup if your TV does not have stereo jacks
VCR
AUDIO
OUT
IN
VIDEO
Audio/video cable (not supplied)
Note
• If you use the Trinitron TV Synchro Play function (page 25), the A/V connection is
necessary. (If your TV has two or more inputs, connect the audio/video cable to the VIDEO
IN 1 (entrada de video 1) jacks.)
www
.
10
Hookups
http://www.xiaoyu163.com
Use
Refer to
Hookup 1
Pages 11 and 12
(Plug and Play
(enchufar y ajustar))
Hookup 2
Pages 13 and 14
(Plug and Play
(enchufar y ajustar))
Hookup 3
Page 15
TV
IN
VIDEO
AUDIO
TV
IN
VIDEO
AUDIO
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
Audio/video (A/V) hookup
If your TV has audio/video (A/V) input jacks, you will get a better picture and sound
if you hook up your VCR using these connections. If your TV does not have A/V
inputs, see the following pages for antenna or cable hookups.
If you are not planning to use your VCR to record programs, you finished setting up
the VCR after you have made the connections shown on this page. If you want to
record regular or cable TV programs, complete these connections first, and then go to
the following pages for antenna or cable hookups.
For SLV-LX700S and SLV-LX600S
For a true "home theater" experience, you should connect the audio outputs of your
VCR or TV to your stereo system.
A Use this hookup if your TV has stereo jacks
VCR
LINE
LINE
OUT
IN 1
AUDIO
VIDEO
Audio/video cable (supplied)
B Use this hookup if your TV does not have stereo jacks
VCR
LINE
LINE
OUT
IN 1
AUDIO
VIDEO
Video cable (not supplied)
Notes
• To play a tape in stereo, you must use the A/V connection.
• If you do not have a stereo receiver, connect the white LINE OUT/AUDIO L (salida de línea/
audio izquierda) jack to the AUDIO IN (entrada de audio) jack on your TV.
• If you use the Trinitron TV Synchro Play function (page 25), the A/V connection is
necessary. (If your TV has two or more inputs, connect the audio/video cable to the VIDEO
IN 1 (entrada de video 1) jacks.)
Q Q
3
6 7
1 3
1 5
Hookup 1 (Plug and Play (enchufar y ajustar))
Antenna hookup
Make the following connections if you are using an antenna (if you do not have cable
TV).
A Use this hookup if you are using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
VCR
IN
OUT
B Use this hookup if you are using a VHF-only antenna (you get
channels 2–13 only)
VCR
IN
OUT
co
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
.
antenna connector (not supplied) so you can connect the cable to the RF IN (entrada
de radiofrecuencia) connector. If you have separate cables for VHF and UHF
antennas, you should use a U/V band mixer (not supplied) (page 50).
1-2
9 4
2 8
Stereo receiver
TV
AUX IN
IN
VIDEO
AUDIO OUT
AUDIO
Audio cable (not supplied)
Stereo receiver
TV
AUX IN
IN
VIDEO
AUDIO
Audio cable (not supplied)
continued
0 5
8
2 9
9 4
2 8
Hookups
Rear of TV
VHF/UHF
Match the type of
A
connector on your
or
TV: A, B, or C.
VHF
B
UHF
or
VHF
C
UHF
Rear of TV
VHF/UHF
Match the type of
A
connector on your
or
TV: A, B, or C.
VHF
B
For connector types
B and C, no UHF
UHF
or
connection is
required.
VHF
m
C
UHF
continued
Hookups
9 9
9 9
9
11
Advertisement
Table of Contents
