Disc/Usb Playback; Basic Playback - Sony MHC-V4D Operating Instructions Manual

Disc/USB Playback

Basic playback

1
For DVD/CD function:
Press DVD/CD.
For USB function:
Press USB.
2
For DVD/CD function:
Press Z on the unit to open the disc
tray and load a disc with the label
facing up on the disc tray.
When you play
back an 8 cm
disc such as a
CD single, place
it on the inner
circle of the tray
Press Z on the unit again to close the
disc tray.
Do not forcibly push the disc tray to
close it as this may cause a
malfunction.
For USB function:
Connect a USB device to the
Note
You can use your iPhone/iPod with this
system via Bluetooth connection only.
GB
18
3
Press N to start playback.
To
Stop playback
Pause playback
Resume playback
or return to normal
playback
Cancel the resume
point
Select a track, file,
chapter or scene
To select the playback source or
transfer destination (USB Memory
Select)
If the USB device has more than one
memory (for example, an internal
memory and a memory card), you can
select which memory to use as a playback
source or transfer destination.
Note
You cannot select a memory during playback or
transfer. Make sure to select a memory before
starting playback or transfer.
port.
1
Press OPTIONS.
2
Press
then press
3
Press
you want, then press
To exit the options menu, press
OPTIONS.
Press
x
X
N
x twice
. or > during
playback.
Or, press the numeric
buttons, then press
(Operation might be
prohibited by disc or
USB device)
/ to select "MEM SEL",
.
/ to select the memory
.
.