Changing The Display Mode; Disc/Usb Playback; Before Using The Usb Device; Basic Playback - Sony MHC-V21 Operating Instructions Manual

Changing the display
mode
Press DISPLAY repeatedly while
the system is turned off.
Each time you press the button, the
display mode changes as follows:
Demonstration
The messages about the main
features of this system scrolls across
the display and the illumination
turns on.
To turn off the illumination, press
PARTY LIGHT (or SPEAKER LIGHT on
the unit).
No display (Power Saving Mode)
The display and the illumination are
turned off to conserve power.
18
US

Disc/USB Playback

Before using the USB
device
For compatible USB devices, see
"Websites for compatible devices"
(page 10).
(You can use your iPhone/iPod
with this system via BLUETOOTH
connection only.)

Basic playback

1
Press FUNCTION repeatedly to
select "CD" or "USB".
2
Prepare the playback source.
For CD function:
Press  on the unit to open the disc
tray and load a disc with the label
facing up on the disc tray.
When you play back an 8 cm disc
such as a CD single, place it on
the inner circle of the tray.
Press  on the unit again to close
the disc tray.
Do not forcibly push the disc tray to
close it as this may cause a
malfunction.