Sony MHC-V4D Operating Instructions Manual page 49

Messages
One of the following messages may
appear or flash in the display panel during
operation.
CANNOT PLAY
• A disc that cannot be played back was
inserted.
• A DVD VIDEO with unsupported
region code was inserted.
DATA ERROR
• The file does not conform to the
required format.
• The file extensions does not match the
file format.
DEVICE ERROR
The USB device could not be recognized
or an unknown device is connected.
DEVICE FULL
The memory of the USB device is full.
ERASE ERROR
Erase of audio files or folders on the USB
device failed.
FATAL ERROR
The USB device was removed during
transfer or erase operation, and may have
been damaged.
FOLDER FULL
You cannot transfer onto the USB device
because the number of folder has reached
its maximum.
FULL
You tried to program more than 25 steps.
NoDEVICE
No USB device is connected.
NO DISC
There is no disc on the disc tray.
NoMEMORY
The memory selected for playback or
transfer has no memory media inserted in
the USB device.
NO MUSIC
MP3/WMA/AAC data does not exist in
MUSIC playback mode.
NO PHOTO
JPEG data does not exist in PHOTO
playback mode.
NO STEP
All of the programmed steps have been
erased.
NO SUPPORT
An unsupported USB device is connected
or the USB device is connected through a
USB hub.
NO VIDEO
MPEG4/Xvid data does not exist in
VIDEO playback mode.
NOT USE
You tried to perform a specific operation
under conditions where that operation is
prohibited.
PROTECT
The USB device is write-protected.
PUSH STOP
You tried to perform an operation that can
be performed only when the playback is
stopped.
READING
The system is reading information of the
disc or USB device. Some operations are
not available.
REC ERROR
The transfer did not start, stopped
partway, or otherwise could not be
performed.
TIME NG
The on time and off time of Play Timer
are the same.
TRACK FULL
You cannot transfer onto the USB device
because the number of file has reached its
maximum.
GB
49