Disc/Usb Playback; Basic Playback - Sony SHAKE-X1D Operating Instructions Manual

Disc/USB Playback

Basic playback

1
Press FUNCTION +/– repeatedly to
select "DVD/CD", "USB 1", or
"USB 2".
You can also use the buttons on the
unit. Press FUNCTION, then turn the
VOLUME/MULTI CONTROL knob to
select "DVD/CD", "USB 1", or
"USB 2", then press ENTER.
2
For DVD/CD function:
Press  on the unit to open the disc
tray and load a disc with the label
facing up.
When you
play back an
8 cm disc such
as a CD single,
place it on the
inner circle of
the tray
Press  on the unit again to close
the disc tray.
Do not forcibly push the disc tray to
close it as this may cause a
malfunction.
For USB function:
Connect a USB device to the
(USB) 1 or (USB) 2 port.
USB device
Notes

You can use your iPhone/iPod with
this system via BLUETOOTH
connection only.

You can use a USB adaptor (not
supplied) to connect the USB device
to the unit if the USB device cannot
be plugged into the
3
(
Press MEDIA MODE repeatedly to
select the media ([MUSIC]/
[VIDEO]/[PHOTO]) you want.
4
Press  to start playback.
To Press

Stop playback
Pause playback 

Resume
playback or
return to normal
playback
 twice
Cancel the
resume point
 or  during
Select a track,
file, chapter or playback.
scene Or, hold down SHIFT, then
press the numeric buttons,
and then press
(Operation might be
prohibited by disc or USB
device)
To select USB memory
You can select which memory to use as
a playback source or transfer
destination if the USB device has an
internal memory and a memory card.
Make sure to select a memory before
starting playback or transfer.
1
Press OPTIONS.
2
Press / repeatedly to select
"MEM SEL", then press
3
Press / repeatedly to select the
memory you want, then press
To exit the options menu, press
OPTIONS.
(USB) port.
only)
.
.
.
19 GB