Tire Pressure - Pride Mobility LEGEND Owner's Manual

Hide thumbs Also See for LEGEND:
Table of Contents

Advertisement

X I I .
C A R E
Your Legend requires a minimal amount of care and maintenance. If you do not feel confident in your ability to
perform the maintenance listed below, you may schedule inspection and maintenance at your authorized Pride
provider. The following areas require periodic inspection and/or care and maintenance.

TIRE PRESSURE:

n For optimum scooter performance we recommend that the tire pressure be maintained between 30-35 psi.
WARNING! Do not exceed that pressure; overinflating a tire can cause it to explode.
n Regularly inspect your Legend’s tires for signs of wear.
n Use a rubber conditioner on your Legend’s tires to help to preserve them.
WARNING! Do not put rubber conditioner on tire tread; this may cause the tires to become danger-
ously slippery.
EXTERIOR SURFACES:
n Bumpers and trim also benefit from an occasional application of rubber or vinyl conditioner.
WARNING! Do not use a rubber or vinyl conditioner on the Legend’s vinyl seat; it may become
dangerously slippery.
BATTERY TERMINAL CONNECTIONS:
n Make certain that the terminal connections remain tight and uncorroded.
n The batteries must sit flat in the battery wells.
n The battery terminals should face the rear of the Legend.
WIRING HARNESSES:
n Regularly check all wiring connections.
n Regularly check all wiring insulation, including the charger power cord, for wear or damage.
n Have your Authorized Pride provider repair or replace any damaged connector, connection, or insulation that
you find before using your Legend again.
ABS PLASTIC SHROUDS:
n The front console shroud, front shroud, and the rear shroud are formed from durable ABS plastic and coated
with an advanced formula urethane paint.
n A light application of car wax will help the shrouds retain their high gloss.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY:
n These items are all prelubricated, sealed, and require no subsequent lubrication.
MOTOR BRUSHES:
n The motor brushes are housed inside of the motor transaxle assembly. They should be inspected periodically
for wear by your Pride provider.
38
A N D
M A I N T E N A N C E
Legend

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents