Specifications - Aiwa HT-DV2300 Service Manual

SPECIFICATIONS -1/1

QQ
3 7 63 1515 0
Power supply 120 V AC, 60 Hz
Power consumption 16 W
Power consumption in standby mode
1.4 W
Weight 5.7 kg (12.9 lbs)
430 × 118 × 414 mm
External dimensions
Laser Semiconductor laser, wavelength:
Signal format NTSC
Supported discs DVD video discs: 12 cm (single-
Compact discs (CD-DA, MP3):
Component video output
Y output: 1.0 Vp-p
P
RCA jacks (C
S-video output Y output: 1.0 Vp-p (75 ohms,
C output: 0.3 Vp-p
4-pin mini DIN jack × 1
Composite video output TE
L 13942296513
1.0 Vp-p (75 ohms, sync
RCA jack × 1
Audio output Digital output: 0.5 Vp-p
Analog output: 2.0 Vrms
Audio output characteristics
Signal-to-noise ratio: More than
Dynamic range: More than 90 dB
Harmonic distortion: 0.008%
Frequency response:
Operating temperatures
5°C to 35°C (41F to 95F)
Specifications are subject to change without notice.
www
.
http://www.xiaoyu163.com
(17 × 4.7 × 16.3 inches)
(w × h × d)
650/780 nm
sided single layer, single-
sided double layer, double-
sided double layer), 8 cm
(single-sided single layer,
single-sided double layer,
double-sided double layer)
12 cm and 8 cm
(75 ohms, sync negative)
/C , P /C outputs: 0.7 Vp-p
R R B B
(75 ohms)
/Y) × 1
/C
R B
sync negative)
negative)
(75 ohms), RCA jack × 1
0.5 Vp-p (75 ohms), Fiber
optical connector × 1
(1 kHz, 0 dB, 330 ohms),
RCA jacks (L/R) × 1
95 dB (EIAJ)
(EIAJ)
CD: 4 Hz to 20 kHz
DVD: 4 Hz to 22 kHz (48-kHz
sampling), 4 Hz to 44 kHz
(96-kHz sampling)
x ao
y
i
http://www.xiaoyu163.com
8
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the
user's right or authority to operate this product.
• Manufactured under license from Dolby Laboratories.
Q Q
"Dolby", "Pro Logic" and the double-D symbol are
3 6 7 1 3
trademarks of Dolby Laboratories. Confidential
unpublished works. ©1992-1999 Dolby Laboratories. All
rights reserved.
• "DTS" and "DTS Digital Out" are trademarks of Digital
Theater Systems, Inc.
u163
.
-3-
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
9 9
2 8 9 9