Table of Contents
Advertisement
Installing the Driftwood Log Set
The PL52DF* has the option of installing a drift wood log
set. Once the firestones or speckled stones have been
installed the log set can be installed.
Ensure logs are securely placed and will not tip or fall.
Remove media where logs touch the burner tray to ensure
a more secure position.
Lean the logs against the back panels. NO LOGS SHOULD
LAY ACROSS OR OVER TOP OF THE BURNER PORTS
ON THE SURFACE OF THE BURNER.
Step 1. Remove the glass door as described in the
previous section.
Step 2. Ensure selected media is installed per instruction
as per Figures 24 - 24d or 25 - 25a.
Step 3. Unpack the logs and handle with care.
3
1
2
Figure 26.
2
3
1
Figure 26a.
Step 4. Place Log 3 from LGS58 in the back right corner
of the burner tray. Ensure log does not cover ports.
Place Log 2 of LGS58 on top of log 3.See Figure 26b.
XG0218 - 160215
Installation
LGS58
5
4
LGS59
5
4
6
2
Ports
Figure 26b.
Step 5. Place Log 5 from LGS58 on top of Log 2. Place
Log 1 from LGS58 on top of log 2, see Figure 26c.
Ports
Figure 26c.
Pilot
6
Ports
Figure 26d.
Step 6. Place log 6 of LGS59 across of log 1 of LGS58,
see Figure 26e.
Ports
Figure 26e.
PL52DF* Indoor Gas Fireplace
1
5
6
3
Page 27
Advertisement
Table of Contents
