Operating instructions
Using SLEEP function
Before using this function, the time must be checked
and set. After the unit starts, set the operation status,
then press "SLEEP" key.
Before going to bed, you can press the "SLEEP"
key on the remote controller and the air condit-
ioner will operate in comfortable SLEEP mode
and bring you a sound sleep.
Operation Mode
In COOL/DRY mode
1 hour after SLEEP mode starts, temp. will become
1 * higher than temp. setting. After another 1 hour,
temp. rises by 1* further. The unit will continue
to run for further 6 hours and then automatically
stops. The controlled temperature is higher than
temperature setting so that room temperature wont
be too low for your sleep.
In HEAT mode
(unavailable for cool only models)
1 hour after SLEEP mode starts, temp. will become
2*lower than temp. setting. After another 1 hour,
temp. decreases by 1* further. This temperature
will be maintained for 3 hours before rising by 1*.
The unit will continue to run for further 3 hours and
then stops automatically. The controlled temperature
is lower than temperature setting so that room
temperature wont be too high for your sleep.
In AUTO mode
The unit operates in corresponding SLEEP mode
adapted to the automatically selected operation mode.
In FAN mode
SLEEP function is not available.
AM
LOW
M I N
TIMER
CLOCK
TIME
SET
Sleep operation starts
About 6 hr
Rise by 1*
1 hr
1 hr
Rise by 1*
Temperature
setting
In COOL/DRY mode
Temperature
setting
1 hr
Decrease by 2*
1 hr
Decrease by 2*
3 hr
Sleep operation starts
In HEAT mode
1 2
SLEEP function
R
SET TEMP
HIGH
SWING
SLEEP
TEMP
FAN
MODE
SPEED
Sleep operation stops
Sleep tem-
perature
Unit stops
Unit stops
About
Sleep tem-
3 hr
perature
Rise by1*
Sleep operation stops