Sleep Function; Operation Mode - Haier AB142ACBBA Operation Manual

Guide to Operation
MODE
TEMP
CLOCK
SET
TIMER
FILTER RESET
OFF
AM AM
ON/OFF

Operation Mode

1.In COOL, DRY mode
One hour after sleeping operation start, the temp.
is 1 C higher than the setting one. After another
hour the temp. rises 1 C and then run continuously
for another 6 hrs and then close. The actual temp.
is higher than the setting one which is to prevent
from being too cool to your sleep.
2.In HEAT mode
One hour after sleeping operation start, the temp.
decreases 2 C lower than the setting one. After
another hour decreases by 2 C more. The temper-
ature will automatically rise by 1 C after an other
3 hrs operation ,and then automatically close after
3 hrs continuous operation.The actual temperature
is lower than the setting one which is to prevent
from being too hot to your sleep.
3.In AUTO mode.
The air conditioner will run in corresponding sleep
operation according to the automatically selected
operation mode.
Note:
In Auto mode, the air conditioner will perform relative Sleep operation according to working mode.
After setting Sleep function, it is not permitted to adjust clock.
The Sleep time is less than 8h, after reaching the set time, the unit will automatically stop.
Set Sleep function after setting ìTimer Offî function, the air conditioner will perform Sleep function.
After setting Sleep function, the Timer function cannot be set.
Set Sleep function after setting ìTimer Onî function, the Sleep function can only be set in the set time of
Timer On.
Before using this function, you should calibrate the clock first,
otherwise, the SLEEP function will be out of order.
Before going to bed, you can press the SLEEP button, the air
FAN SWING
conditioner will operate in comfort sleep mode to make you
have a sound sleep.
Use of SLEEP function
SET
After unit start,first set running mode and then press SLEEP button
SLEEP
once.Mark the air conditioner have the previous-set sleep time(first
power-on or after carrying out sleep function is 1h),the sleep symbol
RESET
will appear. Press time button
hours.Each time the button is pressed the time increases/decreases
1 hour and ì xh î appears in the humidity setting part ,ì OFF î appears
in ì TIMER OFF î display part.

Sleep function

/ , you can choose the time in 1~8
Press Sleep button again to cancel
and the sleep symbol disappears.
SLEEP RUN BEGINS
1 hrs
SETTING T
In COOL,DRY mode
SETTING T
1 hrs
SLEEP RUN BEGINS
11
Sleep Function
SLEEP RUN STOPS
about 6 hrs
increase 1 C
increase 1 C
SHUT DOWN
SHUT DOWN
decrease 2 C
1 hrs
decrease 2 C
about 6 hrs
3 hrs
increase 1 C
SLEEP RUN STOPS
In HEAT mode