Further details regarding the individual steps
2. Activate the venting program via
coding "2F:1".
Note
To call up code 1 and for setting the
coding address, see page 43.
For function and sequence of the
venting program, see page 88.
When the venting program is
enabled, the display shows "Entlüf-
tung" (Venting).
Filling the siphon with water
Commissioning, inspection, maintenance
(cont.)
3. Check the system pressure.
1. Remove retaining clip A and
siphon B.
If required, push insert C up.
2. Fill siphon B with water.
3. Fit siphon B and secure with
retaining clip A.
9