Outgoing Calls; Using The Key Pad For External Calls; Using The Key Pad To Dial Externally As A En-Bloc Dialing - Gigaset 1054isdn User Instructions

10.06.1999
Operating the Standard Mobile Unit

Using the Key Pad for External Calls

After installing your Gigaset 1054isdn and the standard mobile unit you will generally be able to
make a call to a mobile unit that is switched to ON.
g
o
to complete the call:
g
Note:
If the outside line is occupied by another internal subscriber, then the "- - -"will blink in the
display of your mobile unit and you will hear the internal busy signal.

Using the Key Pad to Dial Externally as a En-Bloc Dialing

The "en-bloc function" allows you to view the entered external call number in the display before
dialing.
o
g
Completing the call:
g
Note:
If you would like to change a number combination that was already dialed, then you should
press or
g
The en-bloc dial function can contain up to 20 digits.
1054I-06.FM
Press the phone key.
You will hear the dial tone and
the symbol in the display will blink.
Enter the desired call number.
It will be shown in the display;
here 123456,
You will hear the ring tone.
The subscriber will answer.
You can now carry on the external call...
Press the phone key or return the
mobile unit to the battery charger.
Enter the desired call number. Here 1 2
3 4 5 6.
Press the phone key within 30 seconds.
In the display, the phone symbol will
blink. After this you will hear the dial
tone and the call number will be dialed.
The subscriber answers.
You can carry on the external call...
Press the phone key or return the
mobile unit to the charger.
two times.
w
Gigaset 1054 isdn, GBR: A30853-X200-B101-51-7619

Outgoing Calls

CD
- - -
CD
12 3456
CD
C
12 3456
C
CD
12 3456
CD
C
F
F
F
41