Toshiba Qosmio F60 Series Maintenance Manual page 340

エラー スタイルが定義されていません。
!
Installing the touch pad/TB board
To install the touch pad/TB board, follow the steps below and refer to Figure 4-21 to 4-23.
1. Stick a new touch pad to the slot of the cover assembly in place.
2. Set the touch pad plate and TB board to the slot of the cover assembly in place.
3. Turn up the insulator and secure the touch pad plate and TB board with the following
screws.

M2.04B
4. Connect the touch pad FFC to the connector CN9530 on the TB board and connecter
on the touch pad.
5. Connect the TB board FFC to the connector CN3340 on the TB board.
6. Turn up the insulator and arrange the TB board FFC in place.
4-42 [CONFIDENTIAL]
Replacement Procedures
S-THIN HEAD screw
QOSMIO F60 Maintenance Manual (960-796)
エラー スタイルが定義されてい
!
2