Toshiba Qosmio F60 Series Maintenance Manual page 243

Tests and Diagnostics
■ In the case of FAIL
The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on
the WinPE T&D screen.
The detail of the error is printed to the log of WinPE T&D. More details are as shown below.
Message
An IP address does not
understand one.
WSAStartup failed: xx
failed to set recv
timeout: xx
failed to set send
timeout: xx
Invalid in-address: xx
send to failed: xx
Wrote xx bytes
recvfrom failed: xx
timed out.
3-126 [CONFIDENTIAL]
Explanation
IP address cannot be obtained.
In-use API error
xx indicates error code.
In-use API error
xx indicates error code.
In-use API error
xx indicates error code.
In-use API error
xx indicates IP address
In-use API error
xx indicates error code.
Communication data size
unmatched
xx indicates reception size
In-use API error
xx indicates error code.
Time out occurred.
Qosmio F60 Series Maintenance Manual (960-796)
Remarks
This error occurs when IP is
not assigned or the test is
conducted with a LAN card.
This is a message caused by
an error of Windows Socket
API used in the test.