Toshiba Qosmio F60 Series Maintenance Manual page 334

エラー スタイルが定義されていません。
!
Installing the LED board
To install the LED board, follow the steps below and refer to Figure 4-19.
1. Connect the LED board FFC to the connector on the LED board.
2. Set the SW board to the guides of the cover assembly.
3. Pass the SW board FFC through the hole of the cover assembly.
4-36 [CONFIDENTIAL]
Replacement Procedures
QOSMIO F60 Maintenance Manual (960-796)
エラー スタイルが定義されてい
!