Toshiba Qosmio F50 Series User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Qosmio F50 Series
  6. User manual

Toshiba Qosmio F50 Series User Manual

Hide thumbs Also See for Qosmio F50 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
Qosmio F50 Series

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Qosmio F50 Series

Summary of Contents for Toshiba Qosmio F50 Series

  • Page 1 User’s Manual Qosmio F50 Series...

  • Page 2: Table Of Contents

    Special features ......... 1-12 TOSHIBA Value Added Package ......1-14...
  • Page 3 Web Camera ..........4-9 Using TOSHIBA Face Recognition ......4-11 Using optical disk drives .
  • Page 4 TOSHIBA support ........
  • Page 5 Regulatory statements ........D-2 ® Using Bluetooth Card from TOSHIBA equipment in Japan ..D-5 AC Power Cord and Connectors Appendix E Certification agencies .

  • Page 6: Copyright

    Qosmio F50 Copyright © 2008 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 7: Trademarks

    PalmCheck and TouchPad are trademarks of Synaptics Incorporated. ExpressCard is a trademark of PCMCIA. ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wi-Fi Alliance. Secure Digital and SD are trademarks of SD Card Association.

  • Page 8: Fcc Information

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, Universal Serial Bus...

  • Page 9: Eu Conformity Statement

    "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC and/or R&TTE Directive 1999/5/EC. Responsible for CE- TOSHIBA EUROPE GMBH, Hammfelddamm 8, marking: 41460 Neuss, Germany. manufacturer: Toshiba Corporation, 1-1 Shibaura 1-chome,...

  • Page 10: Modem Warning Notice

    Qosmio F50 Modem warning notice This information is applicable to the models equipped with a built-in modem. Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network...
  • Page 11 Qosmio F50 Redial Up to two redial attempts can be made. If more than two redial attempts are made, the modem will return Black Listed. If you are experiencing problems with the Black Listed code, set the interval between redials at one minute or longer.

  • Page 12: Type Of Service

    FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.

  • Page 13: Instructions For Ic Cs-03 Certified Equipment

    Qosmio F50 Fax branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone fax machine unless such a message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent, an identification of the business, other entity or individual sending the message and the telephone...

  • Page 14: Notes For Users In Australia And New Zealand

    Qosmio F50 The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.
  • Page 15 Qosmio F50 Notes for use of this device in New Zealand ■ The grant of a Telepermit for a device in no way indicates Telecom acceptance of responsibility for the correct operation of that device under all operating conditions. In particular the higher speeds at which this modem is capable of operating depend on a specific network implementation which is only one of many ways of delivering high quality voice telephony to customers.

  • Page 16: General Conditions

    Qosmio F50 ■ When used in Auto Answer mode, the S0 register must be set with to a value of either 3 or 4. This ensures: ■ a person calling your modem will hear a short burst of ringing before the modem answers.
  • Page 17 Qosmio F50 The Telepermit label may also be shown on the packaging of the product and in the sales literature, as required in PTC 100. The charge for a Telepermit assessment is $337.50. An additional charge of $337.50 is payable where an assessment is based on reports against non-Telecom New Zealand Specifications.

  • Page 18: Optical Disc Drive Safety Instructions

    Qosmio F50 Optical disc drive safety instructions Be sure to check the international precautions at the end of this section. Panasonic DVD Super Multi UJ870 ■ The Super Multi DVD drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference.
  • Page 19 Qosmio F50 Pioneer Super Multi DVD DVR-TD08TBA/ DVR-TD08TBC ■ The Super Multi DVD drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 20 Qosmio F50 Hitach-LG Data Storage Super Multi DVD GSA-T50N/ GSA-T50F ■ The Super Multi DVD drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.

  • Page 21: International Precautions

    Qosmio F50 International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.”...
  • Page 22 Qosmio F50 OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

  • Page 23: Preface

    Preface Congratulations on your purchase of the Qosmio F50 series computer. This powerful notebook computer provides excellent expansion capability, includes multimedia functionality, and is designed to provide years of reliable, high-performance computing. This computer family includes a model with a built-in TV tuner. When you...
  • Page 24 Qosmio F50 Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary. Icons Icons identify ports, dials, and other parts of your computer. The indicator panel also uses icons to identify the components it is providing information Keys The keyboard keys are used in the text to describe many computer...
  • Page 25 Qosmio F50 Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions. Terminology This term is defined in this document as follows: Start The word "Start" refers to the " " button in ®...

  • Page 26: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 27: Creating A Computer-Friendly Environment

    Qosmio F50 Creating a computer-friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer. Leave enough space around the computer and other equipment to provide adequate ventilation.

  • Page 28: Pressure Or Impact Damage

    Instruction Manual for Safety and Comfort. Be sure to read it before using the computer. The cautions on use of a Qosmio F50 series computer 1. Clean any dust accumulated on the computer's cooling vents. The cooling vents are located on the back and underside of the computer.
  • Page 29 Qosmio F50 The above illustration is of the subwoofer equipped model. Models without the subwoofer have cooling vents in the subwoofer location pictured above. Models with the subwoofer do not have cooling vents in the subwoofer location pictured above. Cooling vent Cooling vents To prevent possible overheating of the CPU, make sure the cooling fan's air intake is not blocked.

  • Page 30: Introduction

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
  • Page 31 Software ® The following Windows operating system and utility software are pre-installed. ® ® ■ Microsoft Windows Vista ■ TOSHIBA Value Added Package ■ Ulead DVD MovieFactory ® ■ Fingerprint Utility ■ Windows Mobility Center ■ TOSHIBA Gesture Controller ■...

  • Page 32: Hardware

    Introduction Hardware This section describes the hardware of your computer. The actual specifications may vary depending on the model you purchased. Processor Built-in The computer is equipped with one of the following Intel processor. ® ■ Intel ® Core 2 Duo Processor, which incorporates a 3MB level2 cache memory and also supports Enhanced Intel ®...
  • Page 33 Legal Footnote (Memory (Main System)) For more information regarding Memory (Main System), please refer to the Legal Footnotes section in Chapter 11 or click the *2 above. Toshiba Quad Core A co-processor specialized for media streaming processes (real-time image processing such as HD Processor image processing and image recognition) is installed.
  • Page 34 Introduction RTC battery The internal RTC battery backs up the Real Time Clock (RTC) and calendar. AC adaptor The AC adaptor provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord which will either have a 2-pin or 3-pin plug enclosure.

  • Page 35: Optical Disc Drive

    Introduction Legal Footnote (Hard Disk Drive (HDD) Capacity) For more information regarding Hard Disk Drive (HDD) Capacity, please refer to the Legal Footnotes section in Chapter 11 or click the *4 above. Optical disc drive DVD Super Multi The drive reads DVD-ROM's at a maximum 8x drive speed and CD-ROM's at a maximum 24x speed, and writes CD-R's at up to 16x speed, CD-RW's...
  • Page 36 Introduction Display The computer's internal display panel supports high-resolution video graphics and can be set to a wide range of viewing angles for maximum comfort and readability. Display panel 15.4" TFT LCD screen, 32 million colors, with a resolutions ■ 1280 horizontal X 800 vertical pixels WXGA ■...
  • Page 37 Introduction Ports External monitor This port provides 15-pin, analog VGA port.This port allows you to connect an external monitor to the computer. Universal Serial Bus The computer supports multiple Universal Serial (USB 2.0) Bus ports that comply with the USB 2.0 standard. The ports with the ( ) has a USB Sleep and...
  • Page 38 Introduction Multimedia Sound system The integrated sound system provides support for the computer's internal speakers and microphone, also allowing an external microphone and headphones to be connected via the appropriate jacks. Web Camera Web Camera is a device that allows you to record video or take photographs with your computer.
  • Page 39 Introduction TV Tuner TV Tuner enables watching and recording TV programs. Some models are equipped with the TV Tuner. FM Tuner Connecting the included FM Tuner antenna to this jack enables reception of FM broadcasts.Some models are equipped with the FM tuner jack.
  • Page 40 Introduction Communications Modem Some models are equipped with the integrated modem. The integrated modem provides capability for data and fax communications that support the V.90 (V.92) standards and includes a modem jack for connection to the telephone line. Please note that both the V.90 and V.92 standards are only supported in the USA, Canada, United Kingdom, France, Germany and Australia - only the V.90 standard is supported in...

  • Page 41: Special Features

    Connects a security lock to anchor the computer to a desk or other large object. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures.
  • Page 42 Introduction System automatic This feature automatically shuts down the system Sleep/Hibernation into either Sleep Mode or Hibernation Mode when there is no input or hardware access for a Mode specified time. This can be specified in the Power Options. Keypad overlay A ten-key numeric keypad is integrated into the keyboard.

  • Page 43: Toshiba Value Added Package

    TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Power TOSHIBA Power Saver provides you with the...
  • Page 44 Introduction TOSHIBA Flash The TOSHIBA Flash Cards provide a quick way to modify selected system functions and to Cards launch applications. ■ Hot key function ■ TOSHIBA utility launcher function HW Setup This utility allows you to customize your hardware settings according to the way you work with the computer and the peripherals you use.

  • Page 45: Utilities And Applications

    TOSHIBA HD The TOSHIBA HD Console displays the usage Console for each core in the TOSHIBA Quad Core HD Processor and allows applications which use the TOSHIBA Quad Core HD Processor to be started. The TOSHIBA HD Console is displayed in the Windows Sidebar.
  • Page 46 TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that improve the ease and control of communication devices and network connections, help in the...
  • Page 47 In order to determine if the optical disc drive installed in your computer supports Labelflash follow the steps as detailed below: 1. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory.
  • Page 48 Lock button at the bottom of the right pane in the start menu. ■ TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. TOSHIBA DVD This software is provided for playback of DVD PLAYER Video.It has an on-screen interface and...

  • Page 49: Optinal Accessories

    You are able to add a number of options and accessories in order to make your computer even more powerful and convenient to use. For reference, the following list details some of the items that are available from your reseller or TOSHIBA dealer: Memory expansion 1,024MB or 2,048MB memory module (DDR2-800) can easily be installed in the computer.

  • Page 50: Chapter 2 The Grand Tour

    Chapter 2 The Grand Tour This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section in Chapter 11 or click the *9 above.
  • Page 51 The Grand Tour Wireless Slide this switch to the right to turn on Wireless communication LAN and Bluetooth functions. Slide it to the left to switch turn off the functions. All models are provided with a Wireless communication switch although only some models are equipped with both Wireless LAN and Bluetooth functions.

  • Page 52: Left Side

    The Grand Tour Left side The following figure shows the computer's left side. Headphones/ Bridge Media i.LINK S/PDIF, Slot (IEEE1394) Line Out Universal Microphone DVD Super Serial Bus /Line in Multidrive (USB 2.0) port Figure 2-2 The left side of the computer Optical disc drive The computer is configured with a DVD Super Multi drive.

  • Page 53: Right Side

    The Grand Tour Headphone, S/PDIF A 3.5 mm mini headphone jack that lets you and Line out jack connect digital speakers or a stereo headphone (16 ohm minimum). When you connect a digital speaker or headphones, the internal speaker is automatically disabled.

  • Page 54: Back

    The Grand Tour Keep foreign metal objects, such as screws, staples and paper clips, out of the ExpressCard slot and PC Card slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.
  • Page 55 The Grand Tour TV antenna port Connect the antenna cable to this port to watch TV programs on your computer or record them. The dimensions and shape of the TV antenna port vary for different regions. DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal batteries.
  • Page 56 The Grand Tour Link indicator This indicator glows green when the computer is connected to a LAN and the LAN is functioning (green) properly. LAN active indicator This indicator glows yellow when data is being (yellow) exchanged between the computer and the LAN. Modem jack The modem jack allows you use to attach a modular cable in order to connect the internal...

  • Page 57: Underside

    The Grand Tour Underside The following figure shows the underside of the computer. You should ensure that the display is closed before the computer is turned over to avoid causing any damage. Memory Battery Hard disk drive Subwoofer Cooling Vent Figure 2-5 The underside of the computer The above illustration is of the subwoofer equipped model.

  • Page 58: Front With The Display Open

    The Grand Tour Battery pack The battery pack provides power to the computer when the AC adaptor is not connected. For more detailed information on the use and operation of the battery pack please refer to Chapter 6, Power. Speaker (subwoofer) The subwoofer will reproduce of the low frequency sounds generated.
  • Page 59 The Grand Tour Stereo speakers The speakers emit sound generated by your software as well as audio alarms, such as low battery condition, generated by the system. Keep foreign objects out of the speakers. Never allow metal objects, such as screws, staples and paper clips, to enter the computer or keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury.
  • Page 60 The Grand Tour System indicators These LED indicators allow you to monitor the status of various computer functions and are described in more detail within the System indicators section. Web Camera Web Camera is a device that allows you to record video or take photographs with your computer.

  • Page 61: System Indicators

    The Grand Tour Volume control dial Use this dial to adjust the volume of the internal stereo speakers and optional external stereo headphones (if connected). Move the Volume control dial to the right to decrease the volume and to the left to increase the volume.

  • Page 62: Keyboard Indicators

    The Grand Tour Hard Disk Drive The Hard Disk Drive indicator glows blue whenever the computer is accessing the built-in hard disk drive or the other drives. Bridge media slot The Bridge media slot indicator glows blue when the computer is accessing the Bridge media slot.

  • Page 63: Optical Disc Drives

    This section describes the types of writable CD/DVD discs. Check the specifications of your drive to see the types of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Please refer to Chapter 4, Operating Basics for further information.
  • Page 64 The Grand Tour ■ CD-R discs can be written only once. The recorded data cannot be erased or changed. ■ CD-RW discs including multi speed CD-RW discs, high-speed CD-RW discs and ultra-speed CD-RW discs can be recorded more than once. DVDs ■...

  • Page 65: Ac Adaptor

    Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 66: Chapter 3 Getting Started

    Chapter 3 Getting Started This chapter provides basic information to start using your computer. It covers the following topics: ■ If the battery pack is not pre-installed in the computer that you purchased, please install the battery pack before you start using the computer.

  • Page 67: Connecting The Ac Adaptor

    Getting Started ■ Use a virus-check program and make sure it is updated regularly. ■ Never format storage media without checking its content - formatting destroys all stored data. ■ It is a good idea to periodically back up the internal hard disk drive or other main storage device to external media.
  • Page 68 ■ Always use the TOSHIBA AC adaptor that was included with your computer or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 69 Getting Started 1. Connect the power cord to the AC adaptor. Figure 3-1 Connecting the power cord to the AC adaptor (2-pin plug) Figure 3-2 Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model.

  • Page 70: Opening The Display

    Getting Started Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity.

  • Page 71: Turning On The Power

    Getting Started ■ As the display panel cannot be opened until 180 degrees, please be careful of the angle when flipping open the display panel. ■ Be careful not to open the display panel too far as this could put stress on the display panel’s hinges and cause damage.

  • Page 72: Starting Up For The First Time

    Getting Started 1. Open the computer's display panel. 2. Press the computer's power button. Power button Figure 3-5 Turning on the power Starting up for the first time ® The Microsoft Windows Vista Startup Screen will be the first screen displayed when you turn on the power.

  • Page 73: Sleep Mode

    Getting Started ■ Make sure the Hard Disk Drive indicator is off. If you turn off the power while a disk (disc) is being accessed, you may lose data or damage the disk. ■ Never turn off the power while an application is running. Doing so could cause loss of data.

  • Page 74: Executing Sleep Mode

    Getting Started ■ When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options (to access it, Start -> Control Panel -> System and Maintenance -> Power Options). ■ To restore the operation of the computer from Sleep Mode, press and hold the power button or any key on the keyboard for a short amount of time.

  • Page 75: Hibernation Mode

    Getting Started When you turn the power back on, you can continue where you left when you shut down the computer. ■ When the computer is in Sleep Mode, the Power indicator will blink amber. ■ If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode - Sleep Mode will consume more power while the computer is off.

  • Page 76: Restarting The Computer

    Getting Started To enter Hibernation Mode, follow the steps below. 1. Click Start. 2. Click the arrow button ( ) in the power management buttons ) and select Hibernate from the menu. Automatic Hibernation Mode The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the lid.

  • Page 77: System Recovery Options

    Getting Started System Recovery Options About 1.5GB hidden partition is allocated on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the system in the event of a problem. The System Recovery Options feature will be unusable if this partition is deleted.
  • Page 78 Getting Started Creating Optical Recovery Discs This section describes how to create Recovery Discs. ■ Be sure to connect the AC adaptor when you create Recovery Discs. ■ Be sure to close all other software programs except the Recovery Disc Creator.
  • Page 79 Getting Started Restoring the pre-installed software from the Recovery hard disk drive A portion of the total hard disk drive space is configured as a hidden recovery partition. This partition stores files which can be used to restore pre-installed software in the event of a problem. If you subsequently set up your hard disk drive again, do not change, delete or add partitions in a manner other than specified in the manual, otherwise you may find that space for the required software is not available.
  • Page 80 Press the F9 key to set to default settings, and select the Yes. ■ When the "In Touch with Tomorrow TOSHIBA" prompt appears, press the F12 key to display the Boot menu. Continue with step 3. 3. Use the up and down cursors key to select the CD-ROM icon from the menu.

  • Page 81: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer, highlights the precautions that should be taken when using it. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.

  • Page 82: Av Controller

    Operating Basics You can also tap the Touch Pad to perform functions similar to those of the left button on a standard mouse. Click: Tap once Double-click: Tap twice Drag and drop: Tap to select the item(s) you want to move, leave your finger on the Touch Pad after the second tap and then move the item(s) to their new destination.

  • Page 83: Points To Note About The Fingerprint Sensor

    Operating Basics Fingerprint cannot be used in models that do not have a fingerprint module installed. How to Swipe your Finger Using the following steps when swiping fingers for fingerprint registration or authentication will help to minimize authentication failures: Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you until the sensor surface becomes visible.
  • Page 84 Operating Basics ■ Do not touch the sensor with a soiled or dirty finger as minute foreign particles of dust and dirt may scratch it. ■ Do not paste stickers or write on the sensor. ■ Do not touch the sensor with a finger or any other object which may have a build-up of static electricity on it.

  • Page 85: Fingerprint Registration

    Operating Basics Setup Procedure Please use the following procedure when first using fingerprint authentication. Fingerprint Registration You should initially enroll the required authentication data using the Fingerprint Enrollment Wizard. ■ In use, the fingerprint authentication system will use the same username and password as defined within the Windows operating system.

  • Page 86: How To Delete The Fingerprint Data

    Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.

  • Page 87: Windows Logon Via Fingerprint Authentication

    Operating Basics Points to note about the Fingerprint Utility software You are able to backup saved fingerprint data and information within the PasswordBank by using the Import or Export User Data facility under the fingerprint management software. However, please be aware that any encrypted files cannot be backup within FileSafe using this function - in these instances it is recommended that you backup these files to external media using standard file copy processes.

  • Page 88: How To Enable Fingerprint Pre-Os Authentication Settings

    Operating Basics ■ You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the Fingerprint Pre-OS Authentication and its extended function to allow fingerprints to be used to access the computer when it is turned on.

  • Page 89: Web Camera

    TOSHIBA does not guarantee that the fingerprint utility technology will be completely secure or error-free, or that it will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the fingerprint software.
  • Page 90 Operating Basics Microphone Web Camera Web Camera LED Figure 4-3 Web Camera ■ Please unstick the protective plastic-film before using the Web Camera. ■ Do not point the web camera directly at the sun. ■ Do not touch or press strongly on the web camera lens. Doing so may reduce image quality.

  • Page 91: Using Toshiba Face Recognition

    Toshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.
  • Page 92 Take a picture for facial verification purposes, and register the data needed when you log in. To register the data needed when you log in, follow the steps as described below: 1. To launch this utility, click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA Face Recognition. ■...

  • Page 93: Auto Mode Login Screen

    How to launch the help file For further information on this utility, please refer to the help file. 1. To launch the help file, click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA Face Recognition Help. Windows Logon via TOSHIBA Face Recognition This section explains how to login to Windows with TOSHIBA Face Recognition.

  • Page 94: Using Optical Disk Drives

    Operating Basics 6. Windows Welcome screen will be displayed, and will be logged in automatically to Windows. 1:1 Mode Login screen 1. Turn on the computer. 2. The Select Tiles screen will be displayed. 3. Select Start face recognition ( 4.

  • Page 95: Loading Discs

    Operating Basics Loading discs To load CD/DVD's, follow the steps as listed below and refer to figures 4-4 to 4-6. 1. When the computer's power is on, press the eject button to open the disc tray slightly. Eject button Figure 4-4 Pressing the eject button 2.
  • Page 96 Operating Basics 3. Lay the CD/DVD, label side up, in the disc tray. Laser lens Figure 4-6 Inserting a CD/DVD When the disc tray is fully opened, the edge of the computer will extend slightly over the area where you insert the media. Therefore, when loading a CD or DVD, you will need to turn it slightly at an angle when you place it in the disc tray.

  • Page 97: Removing Discs

    Operating Basics Removing discs To remove CD/DVD's, follow the steps as listed below. Do not press the eject button while the computer is accessing the media in the drive, instead wait for the indicator to go out before you open the disc tray.

  • Page 98: Writng Cd/Dvd On Dvd Super Multi Drives

    DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW, DVD-RAM, or DVD-R (Dual Layer) discs. TOSHIBA Disc Creator and Ulead DVD MovieFactory are provided as writing software with this computer. Ulead DVD MovieFactory can be used to write files in video format.

  • Page 99: Important Message

    CD-R/RW media cannot be accessed using the Create CD/DVD option in Media Center. ■ To write data to CD-R/-RW media, use the TOSHIBA Disc Creator feature that is installed on your computer. When writing information to media using an optical drive, you should always ensure that you connect the AC adaptor to a live power socket.

  • Page 100: Before Writing Or Rewriting

    RAM media, however, it must be noted that disc quality can affect write or rewrite success rates. Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: TAIYO YUDEN CO., Ltd.
  • Page 101 Operating Basics DVD-RW: DVD Specifications for Recordable Disc for Version 1.1 or version 1.2 Victor Company of Japan, Ltd. (JVC) (for 2x, 4x and 6x speed media) MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2x, 4x and 6x speed media) DVD+RW: Ricoh Co., Ltd.

  • Page 102: When Writing Or Rewriting

    CD/DVD - do not try to write from shared devices such as a server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed, therefore operation with other software applications cannot be guaranteed.

  • Page 103: Toshiba Disc Creator

    CD Player' function to record music to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW media. ■ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order to copy DVD Video or DVD-ROM material that has copyright protection. ■...

  • Page 104: Data Verification

    TOSHIBA Disc Creator cannot record in packet format. ■ You might not be able to use the 'Disc Backup' function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media recorder.

  • Page 105: How To Learn More About Toshiba Disc Creator

    Simplified steps for making a Labelflash DVD: 1. Insert a Labelflash disc in optical disc drive. Set PRINTING SIDE for underside. 2. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Lancher to launch DVD MovieFactory.

  • Page 106: How To Learn More About Ulead Dvd Moviefactory

    Operating Basics Method 2: Simplified steps for making a DVD-Video from adding video source: 1. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Click Video Disc -> New Project to invoke 2 Launcher, choose your project type, then invoke DVD MovieFactory.
  • Page 107 Operating Basics ■ While recording video to DVD, please close all other programs. ■ Do not run software like a screen saver because it can put a heavy load on the CPU. ■ Do not support mp3 decode and encode. 2.

  • Page 108: Notes On Use

    Operating Basics TOSHIBA DVD Player Please be aware of the following limitations when you use the TOSHIBA DVD PLAYER: Notes on use ■ Frame dropping, audio skipping or out of synch audio and video may occur during playback of some DVD Video titles.

  • Page 109: Toshiba Dvd Player

    Operating Basics Display Devices & Audio 1. "TOSHIBA DVD PLAYER" will only run when "Colors" is set to "Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in the "Display Settings". To open the Display Settings, click Start ->...

  • Page 110: Media Care

    Top Menu or Menu buttons, touch pad and mouse menu operations may not be able to be used. Open TOSHIBA DVD PLAYER HELP TOSHIBA DVD PLAYER features and instructions are also explained in detail in "TOSHIBA DVD PLAYER Help".Use the following procedure to open "TOSHIBA DVD PLAYER Help".

  • Page 111: Floppy Diskettes

    Operating Basics Floppy diskettes The USB floppy diskette drive is available only as an option. 1. Store your floppy diskettes in the container they came in to protect them and keep them clean. If a floppy diskette becomes dirty, clean it with a soft, lightly dampened cloth - do not use cleaning fluid.

  • Page 112: Tv Tuner

    Operating Basics TV Tuner Use the My TV feature of Media Center in Windows mode to watch TV programs or record them. The dimensions and shape of the TV antenna port vary for different regions. ■ Some computer models are equipped with a tuner capable of receiving digital broadcasts.

  • Page 113: Sound System

    Operating Basics 1. Save data, shutdown Windows and turn off the power. 2. Connect the antenna cable to the TV antenna port of your computer. TV antenna port Antenna cable Figure 4-9 Connecting the antenna cable When you have been using a descrambler to receive the programs on cable TV or satellite broadcasting, connect the set-top box and splitter to the coaxial cable and the antenna cable.

  • Page 114: Changing System Sounds

    Operating Basics Changing System Sounds System sounds are assigned to inform you when certain events happen. This section explains how select an existing scheme or save one you have modified. To launch the configuration dialog window for system sounds, follow the steps below.

  • Page 115: Modem

    Operating Basics Sound Effects This section explains how to select various sound effects. ■ Environment - simulates reverberations of sound for familiar environments around us. You can select an existing preset in the menu. ■ Equalizer - raises or lowers a frequency of sound to simulate a popular genre of music.
  • Page 116 Check the specified areas carefully before using it. To select a region, follow the steps as detailed below: 1. Click Start -> All Programs -> TOSHIBA -> Networking -> Modem Region Select. If it is available, do not use the Country/Region Select function included as...

  • Page 117: Properties Menu

    Operating Basics 4. Select either a region from the region menu or a telephony location from the sub-menu. ■ When you click a region it becomes the modem's default selection for any new dialling locations that are created within the Windows Control Panel (Phone and Modem Options).
  • Page 118 Operating Basics Connecting the modular cable To connect the modem's modular cable, follow the steps as detailed below: ■ Connection to any communication line other than an analog phone line could cause a computer system failure. ■ Connect the built-in modem only to ordinary analog phone lines. ■...

  • Page 119: Wireless Communications

    Operating Basics Using the FM tuner To connect the FM tuner antenna, follow the steps as detailed below: 1. Plug the FM tuner antenna into the computer's FM tuner jack. Figure 4-11 Connecting the FM tuner jack 2. For how to set the FM software and for more information, please refer to Listen to radio section in Chapter8.

  • Page 120: Worldwide Operation

    ■ TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Bluetooth wireless technology Bluetooth™...

  • Page 121: Product Support

    This Bluetooth Stack is based on the Bluetooth Version 1.1/1.2/2.0+EDR/2.1+EDR pecification. However, TOSHIBA cannot confirm the compatibility between any computing products and/or other electronic devices that use Bluetooth, other than TOSHIBA notebook computers. ® ®...

  • Page 122: Lan

    Operating Basics ■ Do not use the Wireless LAN (Wi-Fi), WiMax or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields. Interference from a microwave oven or other source can disrupt Wi-Fi, WiMax or Bluetooth operation. ■...

  • Page 123: Lan Cable Types

    Operating Basics ■ The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. ■ The Link speed (10/100/1000 megabits per second) changes automatically depending on the network conditions (connected device, cable or noise and so on).

  • Page 124: Cleaning The Computer

    Operating Basics LAN Active (Amber) LAN cable Figure 4-12 Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector or router. Check with your LAN administrator and hardware or software vendor before using or configuring a network connection. When the computer is exchanging data with the LAN, the LAN Active indicator glows yellow.

  • Page 125: Moving The Computer

    Operating Basics Using the cleaning cloth Some models include 1 cleaning cloth. The cleaning cloth can be used to wipe away dust and fingerprints from the keyboard and palm rest area of your computer. ■ When wiping the keyboard, palm rest and display panel, do so gently without using excessive pressure.
  • Page 126 Operating Basics ■ Always use a suitable carry case when transporting the computer. ■ When carrying your computer, be sure to hold it securely so that it does not fall or hit anything. ■ Do not carry your computer by holding any of its protruding elements. User’s Manual 4-46...

  • Page 127: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced keyboard functions can be performed on the computer. The number of keys available on your keyboard will depend on which country/region your computer is configured for, with keyboards being available for numerous languages.

  • Page 128: Function Keys: F1

    Soft keys: FN key combinations The FN (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 129: Hot Keys

    The Keyboard Press FN + F10 or FN + F11 to access the computer's integrated keypad. When activated, the keys with grey markings on their bottom edge become either numeric keypad keys (FN + F11) or cursor control keys (FN + F10). Please refer to the Keypad overlay section in this chapter for more...
  • Page 130 The Keyboard Sleep: Pressing FN + F3 switches the system to Sleep mode. Hibernate: Pressing FN + F4 switches the system to Hibernate mode. Output: Pressing FN + F5 changes the active display device. Brightness (Down): Pressing FN + F6 decreases the computer's display panel brightness in individual steps.

  • Page 131: Windows Special Keys

    FN Sticky key You can use the TOSHIBA Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and then press an "F Number" key. To start the TOSHIBA Accessibility utility, click Start -> All Programs ->...

  • Page 132: Keypad Overlay

    The Keyboard Keypad overlay Your computer's keyboard does not have a separate numeric keypad but includes a numeric keypad overlay which functions like one - this is located in the center of the keyboard with the relevant keys having grey letters at their front edge.

  • Page 133: Generating Ascii Characters

    The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard functions without having to turn the overlay off: 1. Hold FN and press any other key - this key will operate as if the overlay were off.

  • Page 134: Power

    Chapter 6 Power The computer's power resources include the AC adaptor, battery pack and any internal batteries. This chapter provides details on making the most effective use of these resources, and includes information on charging and changing batteries, tips for saving battery power, and information on the different power-up modes.

  • Page 135: Power Indicators

    Power Table 6-1 Power conditions continued Power on Power off (no operation) Battery charge • Operates adaptor is above low • LED: Battery off battery trigger DC IN off connected point Battery charge • Operates is below low • LED: Battery battery trigger flashes Amber point...

  • Page 136: Battery Types

    Power DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected - the following indicator conditions should be noted: Indicates the AC adaptor is connected and is White correctly supplying power to the computer. Under any other conditions, the indicator does not No light light.

  • Page 137: Real Time Clock Battery

    Press <F1> to resume, <F2> to Setup. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.

  • Page 138: Care And Use Of The Battery Pack

    The battery pack is lithium ion battery, which can explode if not replaced, used, handled or disposed of properly. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Charge the battery pack only in an ambient temperature between 5 and 35 degrees Celsius.

  • Page 139: Battery Charging Notice

    Power Use only the computer connected to an AC power source or the optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger. Time The following table shows the approximate time required to fully charge a discharged battery.

  • Page 140: Monitoring Battery Capacity

    Power Repeat these steps two or three times until the battery recovers normal capacity. Monitoring battery capacity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the task bar ■ Via the Battery Status in the Windows Mobility Center window ■...

  • Page 141: Retaining Data With Power Off

    Power Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Retention Time Battery type State and Retention Time Battery pack 1.5 days for 8 cell; 0.75 days for 4 cell (sleep mode) about 10days(Shut Down Mode) RTC battery...

  • Page 142: Replacing The Battery Pack

    Power Replacing the battery pack Please be aware that the battery pack is classified as a consumable item. The operating life of the battery pack will gradually reduce through repeated charging and discharging, and will need to be replaced when it reaches the end of its operating life.
  • Page 143 Power 6. Slide and hold the battery release latch (1) to disengage the battery pack and then remove it from the computer (2). Battery Pack Figure 6-2 Releasing the battery pack (2) To install a battery, follow the steps as detailed below: 1.

  • Page 144: Toshiba Password Utility

    Power TOSHIBA Password Utility The TOSHIBA Supervisor Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Supervisor Password Utility are different from ® the Windows login password. User Password To start the utility, point to or click the following items:...

  • Page 145: Power-Up Modes

    Power To enter a password manually, follow these steps: 1. Turn on the power as described in Chapter 3, Getting Started. The following message will appear in the LCD: Enter Password [xxxxxxxx] At this point, the hotkeys Fn + F1 to F9 do not work. They will function after you enter the password.

  • Page 146: Panel Power On/Off

    Power Panel power on/off You can set up your computer so that power is turned off automatically when you close the display panel, and turned on again when you open it. Please note that this function is only available for Sleep Mode or Hibernation Mode, not for Shut Down Mode.

  • Page 147: Chapter 7 Hw Setup

    Accessing HW Setup Start, point to All Programs, point to TOSHIBA, point to Utilities and click HWSetup. HW Setup Window The HW Setup window contains the following tabs: General, Password,Display, Boot Priority, CPU, Keyboard, LAN, and USB.

  • Page 148: Boot Priority

    HW Setup Setup This field displays BIOS Version and date. When finish BIOS update, please restart your computer and press F2 into BIOS setup manual and load BIOS default one time. Password This tab allows you to set or reset the user password for power on. This function lets you set the CPU operating mode.

  • Page 149: Usb Sleep And Charge Function

    HW Setup USB KB/Mouse Legacy Emulation You can use this option to enable or disable USB keyboard/mouse legacy emulation so that, even if your operating system does not support USB devices, you can still use a standard USB mouse and keyboard - to achieve this you should set the appropriate option(s) to Enabled.
  • Page 150 HW Setup ■ When "USB Sleep and Charge function" is set to [Enabled], USB bus power (DC5V) will be supplied to compatible ports even when the power of the computer is turned OFF. USB bus power (DC5V) is similarly supplied to the external devices which are connected to the compatible ports.
  • Page 151 HW Setup Enables USB Sleep and Charge function. Enabled (Mode-1) Enables USB Sleep and Charge function. Enabled (Mode-2) Disables USB Sleep and Charge function Disabled (Default). Wake-up on LAN This feature lets the computer's power be turned on when it receives a wakeup signal from the LAN.

  • Page 152: Chapter 8 Av Functions

    Chapter 8 AV functions This chapter explains how to use the AV functions. ® ■ The state where Windows Vista is active is referred to as Windows mode. Media Center This section describes the Media Center. ■ You can record TV programs and pictures/movies from external input devices using the TV tuner.

  • Page 153: Front Operation Panel

    AV functions ® Windows Vista has the following function. ■ Watch TV or a DVD movie. ■ Pause, rewind, and fast forward TV programs using the Media Center time shifting feature. ■ Watch an instant replay. ■ Play back your digital videos. ■...
  • Page 154 AV functions Camera You can use this panel to open the camera software. CD/DVD panel Touching this panel will launch an application program that allows you to watch a DVD or listen to a CD. Touching this panel while the computer is on or in Sleep Mode, will launch Media Center.
  • Page 155 AV functions Windows Media Center Icon Front operation Media Center - Media Center - Media Center - panel My TV (TV) Play DVD My Music (CD) (DVD) CD/DVD Run Media Run Media Center and play Center and start My Music Play/Pause Play/Pause Play/Pause...

  • Page 156: Remote Controller

    AV functions Remote Controller A remote controller, which is provided with some models, enables you to perform some functions of your computer from a distant location. There are two different types of remote controllers: ■ Full size remote controller ■ Slim size remote controller ■...
  • Page 157 AV functions Full Size Remote controller Access indicator Power Pause Stop Record Play Rewind Forward Skip Replay Start More Back Arrows OK Button Mute Volume Control Channel/ Page Control Live TV Guide DVD Menu Recorded TV Numeric Keypad Clear Enter Figure 8-2 Remote Controller User’s Manual...
  • Page 158 AV functions Access indicator Power Pause Stop Record Play Rewind Forward Skip Replay Start More Back Arrows OK Button Mute Volume Control Channel/ Page Control Live TV Guide DVD Menu Recorded TV Numeric Keypad Teletext Clear Enter Blue Green Yellow Figure 8-3 Remote Controller User’s Manual...
  • Page 159 AV functions Power Starts or terminates the operating system. This button functions like the Power button of your computer. By default, the Sleep Mode is equivalent to the Power Off state of your computer. To change the setting, click Start, select Control panel ->...
  • Page 160 AV functions Selects the desired action or window option. It acts like the ENTER Key. If watching TV in full screen mode, pressing OK switches back to the previous viewed channel. Press again to toggle back. It acts the same way as a Jump button on some TV remote controls.

  • Page 161: Slim Size Remote Controller

    AV functions Red, Green, Yellow It jumps to a registration link. and Blue buttons These buttons are not provided with some models. Teletext Starts or terminates the Teletext mode. This button is not provided with some models. Slim Size Remote Controller Brightness up Brightness down CD/DVD...
  • Page 162 AV functions Brightness up Increases the computer's display panel brightness in individual steps. Power Starts or terminates the operating system. This button functions like the Power button of your computer. By default, the Sleep Mode is equivalent to the Power Off state of yourcomputer.

  • Page 163: Using The Remote Controller

    AV functions Replay Moves media backward (seven seconds for videos, one music track or one DVD chapter at a time). Stop Stops the media currently playing. Skip Moves media forward (30 seconds for videos, one music track or one DVD chapter). Using the Remote Controller Some computers include a remote control unit, which allows you to control some of your computer’s functions from a distant location.

  • Page 164: Installing/Removing Batteries

    AV functions Even if within the effective scope as described above, the remote control may malfunction or not work correctly in the following cases. ■ When an obstacle stands between the infrared receiver window of your computer and the Remote Controller. ■...

  • Page 165: Installing The Batteries

    AV functions Type of battery that can be used for the Remote Controller When the batteries shipped with the Remote Controller are discharged, replace them with commercially available AA manganese batteries or AA alkaline batteries. Other types or battery should not be used. Installing the batteries 1.

  • Page 166: Replacing The Batteries

    AV functions Replacing the batteries When the batteries in the Remote Controller reach the end of their life, the Remote Controller may not operate correctly or work only within a short distance from your computer. In this instance, you should purchase new batteries and replace the discharged ones.

  • Page 167: Replacing The Battery

    AV functions 3. Close the battery cover. Close the cover securely until it clicks. Battery cover Figure 8-12 Closing the battery cover Replacing the battery 1. Open the battery cover on the back side of the remote controller. 2. Hold down the stopper and slide the battery out of battery case. Battery Stopper Figure 8-13 Removing the batteries...

  • Page 168: Set-Top Box Connection Method And Watching Tv On The Media Center

    AV functions Removing a Slim size remote controller To remove a Slim size remote controller, follow the steps as detailed below: 1. Press a Slim size remote controller slightly to make it stretch out. 2. Grasp a Slim size remote controller and pull it out from the slot. ExpressCard slot Slim size remote controller...

  • Page 169: Activating Media Center For The First Time

    AV functions 2. Connect the other end of the infrared transmitter cable to a set-top box. It is placed in front of the infrared receiver window on the set-top box to allow the Full size remote controller to be used to change channels. 3.

  • Page 170: Listen To Radio

    Starting FM software 1. Active Media Center. 2. To launch the FM software, scroll to Toshiba then click FM Tuner. 3. The FM tuner screen is displayed, to find a radio section, click - / + button or << / >> button below the Step or Seek.

  • Page 171: Qosmioengine

    AV functions QosmioEngine Users can select from three video quality modes depending on their preferences for watching videos. Modes There are the following three modes. ■ Dynamic: Users can enjoy videos in a bright and exciting way. ■ Standard: Users can enjoy videos in their room in a relaxed way. ■...

  • Page 172: Chapter 9 Optional Devices

    Chapter 9 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes the connection or installation of the following devices: To connect optional devices (such as USB device or External monitor) to the computer, be sure to check the shape and orientation of the connector before connecting.

  • Page 173: Expresscard

    The computer is equipped with a single ExpressCard slot into which any ExpressCard device that meets industry standards, either manufactured by TOSHIBA or another vendor, can be installed. The slot supports hot plug connection and utilizes the PCI Express interface that supports the reading and writing of data at a theoretical maximum rate of 2.5Gbps.

  • Page 174: Bridge Media Slot

    Optional Devices Removing an ExpressCard To remove an ExpressCard, follow the steps as detailed below. 1. Open the Safely Remove Hardware icon on the Windows Task Bar. 2. Point to ExpressCard and click the left Touch Pad control button. 3. Press the ExpressCard eject button to partially extend it out of the computer.
  • Page 175 Optional Devices ■ This Bridge media slot supports the following memory media. ■ Secure Digital (SD) Card (SD memory card, SDHC memory card, miniSD Card, microSD Card) ■ Memory Stick (Memory Stick Duo, Memory Stick PRO, Memory Stick PRO Duo) ■...

  • Page 176: Memory Media

    Optional Devices Memory media This section provides the important safety precautions in order to handle your memory media. Points to note about the SD/SDHC memory card SD/SDHC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.

  • Page 177: Media Care

    Optional Devices Media care This section provides tips on protecting data stored on your CD's, DVD's and floppy diskettes. Handle your media with care. Following the simple precautions listed below will increase the lifetime of your media and protect the data stored on it. CD/DVDs 1.

  • Page 178: Inserting A Memory Media

    Optional Devices 5. Never use a pencil for writing on a floppy diskette label as the dust from the pencil lead could cause a system malfunction if it found its way onto the computer's components. In this instance, always use a felt-tipped pen and write the label first before applying it to the floppy diskette.

  • Page 179: Removing A Memory Media

    Optional Devices Bridge Media Slot Memory Media Figure 9-4 Inserting a memory media ■ Press gently until the cover into place. ■ Make sure memory media is oriented properly before you insert it. If you insert the media in wrong direction, you may not be able to remove ■...

  • Page 180: Additional Memory Module

    Optional Devices Bridge Media Slot Memory Media Figure 9-5 Removing memory media ■ Press gently until the cover into place. ■ Make sure the Bridge Media slot indicator is out before you remove the memory media or turn off the computer’s power. If you remove the memory media or turn off the power while the computer is accessing the memory media, you may lose data or damage the media.

  • Page 181: Installing A Memory Module

    Optional Devices ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. a. The computer is turned on. b. The computer was shut down in either Sleep or Hibernation Mode.
  • Page 182 Optional Devices 3. Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 6, Power, if required). Screws Memory module cover Slot A Slot B Figure 9-6 Removing the memory module cover 4.

  • Page 183: Removing A Memory Module

    Optional Devices ■ Never allow metal objects, such as screws, staples and paper clips, to enter the computer or keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury. ■...

  • Page 184: Battery Packs

    Optional Devices 3. Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 6, Power, if required). 4. Push the latches away from the module in order to release it. 5. Grasp the memory module by its edges and remove it from the computer.

  • Page 185: Usb Floppy Diskette Drive

    Optional Devices USB floppy diskette drive The USB floppy diskette drive accommodates either a 1.44MB or 720KB a 3 2/1" floppy diskette and connects to one of the computer's USB ports. The USB floppy diskette drive is available only as an option. USB connector Disk-In-Use Floppy diskette slot...
  • Page 186 Optional Devices Using the USB floppy diskette drive The USB floppy diskette drive accommodates either a 1.44MB or 720KB floppy diskette and connects to one of the computer's USB ports. Connecting the USB floppy diskette drive To connect the drive, plug the floppy diskette drive's USB connector into one of the computer's free USB ports.

  • Page 187: Esata (External Serial Ata)

    Optional Devices eSATA (External Serial ATA) An device corresponding to eSATA function can be connected to the USB (eSATA combo) port on the computer. Connecting the eSATA device To connect an eSATA device, follow the steps as detailed below: 1. Connect an eSATA cable to the eSATA/USB combo port. Make sure the connector is properly aligned with the socket.Do not try to force the connection, doing so can damage the connecting pins.

  • Page 188: External Monitor

    Optional Devices 2. Click the Safely Remove Hardware icon on the Windows Taskbar. 3. Click an eSATA device that you want to remove. 4. Carefully pull an eSATA device's USB (eSATA combo) connector out from within the computer's USB (eSATA combo) port. External monitor An external analog monitor can be connected to the computer's external monitor port, with the computer supporting WUXGA video mode.

  • Page 189: Hdmi

    Optional Devices HDMI The Video data on your computer can be viewed on a TV set. To do so, connect your computer’s HDMI out port to the TV using the HDMI out cable. You can use the hotkeys FN + F5 to change the display device. Refer to Chapter 5, Keyboard.
  • Page 190 Optional Devices Settings for display video on HDMI To view video on the HDMI device, be sure to configure the following settings otherwise you may find that nothing is displayed. ■ Be sure to use the FN + F5 HotKey to select the display device before starting to play video.

  • Page 191: I.link (Ieee1394)

    Optional Devices Some models are supported with the REGZA Link. Using REGZA Link (PC Control) Toshiba notebooks with REGZA Link include a Toshiba utility dedicated to take advantage of its capabilities which can allow you to: ■ Use the TV remote control to output the computer screen onto the TV screen.
  • Page 192 Optional Devices ■ If you connect/disconnect an i.LINK device to/from another i.LINK device that is currently exchanging data with the computer, data frames might be dropped. ■ Make sure data transfer has ended or turn off the computer, before you: ■...

  • Page 193: Security Lock

    Optional Devices Refer also to the documentation that came with your i.LINK device Security lock A security locks enable you to anchor your computer a desk or other heavy object in order to help prevent unauthorized removal or theft. The computer has a security lock slot on its right side into which you can attach one end of the security cable, while the other end attaches to a desk or similar object.

  • Page 194: Troubleshooting

    Chapter 10 Troubleshooting TOSHIBA have designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.

  • Page 195: Preliminary Checklist

    Troubleshooting Preliminary checklist You should always consider the simplest solution first - the items detailed in this checklist are easy to fix and yet can cause what appears to be a serious problem: ■ Make sure you turn on all peripheral devices before you turn on the computer - this includes your printer and any other external device you are using.

  • Page 196: Hardware And System Checklist

    Before using a peripheral device or application software that is not an authorized Toshiba part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.

  • Page 197: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system according to how the Boot Priority option is set within the TOSHIBA HW Setup program. If any of the following conditions are present, the self test has failed: ■...

  • Page 198: Overheating Power Down

    Troubleshooting Overheating power down If the processor's temperature reaches an unacceptably high level with either setting, the computer will automatically shuts down to prevent any damage - in this instance all unsaved data in memory will be lost. Problem Procedure Computer shuts down Leave the computer off until the DC IN indicator and DC IN indicator...
  • Page 199 Troubleshooting Battery If you suspect a problem with the battery, you should check the status of the DC IN indicator as well as the Battery indicator. Please refer to Chapter Power for more information on these indicators, together with general battery operation.

  • Page 200: Real Time Clock

    3. Press [F2] to set the time in [System Time]. [F2] key to set Date/Time. Password Problem Procedure Cannot enter Please refer to the TOSHIBA Password Utility password section in Chapter 6, Power for further information. Keyboard Keyboard problems can be caused by the setup and configuration of the...

  • Page 201: Hard Disk Drive

    Alternatively you may wish to run the TOSHIBA PC Diagnostic Tool to check the general operation of the computer. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

  • Page 202: Dvd Super Multi Drive

    Troubleshooting Problem Procedure Slow performance The files on the hard disk drive may be fragmented - in this instance you should run the disk Defragmentation utility to check the condition of your files and the hard disk drive. Please refer to the operating system's documentation or online Help File for further information on operating and using the Defragmentation utility.
  • Page 203 Troubleshooting Problem Procedure Some CD/DVD/DVDs The computer's software or hardware run correctly, but others configuration may be causing a problem - ensure do not that these configurations match the requirements of the CD/DVD media (refer to the CD's or DVD's documentation if available).
  • Page 204 Troubleshooting ExpressCard For further information, please refer to Chapter 9, Optional Devices. Problem Procedure ExpressCard error Remove the ExpressCard from the computer and occurs then reinsert it in order to ensure it is firmly connected. In the event that the ExpressCard is attached to an external peripheral device, ensure that this connection is properly made.

  • Page 205: Xd Picture Card

    Troubleshooting Memory Stick/Memory Stick Duo/Memory Stick PRO/Memory Stick PRO Duo For further information, please refer to Chapter 9, Optional Devices. Problem Procedure Memory Stick/Memory Remove the Memory Stick/Memory Stick Stick Duo/Memory PRO/Memory Stick PRO Duo from the computer Stick PRO/Memory and then reinsert it in order to ensure it is firmly Stick PRO Duo error connected.

  • Page 206: Infrared Receiver Window

    Troubleshooting MultiMediaCard For further information, please refer to Chapter 9, Optional Devices. Problem Procedure MultiMediaCard error Remove the MultiMediaCard from the computer occurs and then reinsert it in order to ensure it is firmly connected. If the problem persists, then you should refer to the documentation supplied with your MultiMediaCard for further information.
  • Page 207 Troubleshooting Problem Procedure Double-tapping does In this instance, you should initially try changing not work the double-click speed setting within the Mouse Control utility. 1. To access this utility, click Start -> Control Panel -> Hardware and Sound -> Mouse icon.

  • Page 208: Usb Mouse

    Troubleshooting USB mouse Problem Procedure On-screen pointer In this instance the system might be busy - Try moving the mouse again after waiting a short does not respond to while. mouse operation Remove the mouse from the computer and then reconnect it to a free USB port it in order to ensure it is firmly attached.

  • Page 209: Fingerprint Sensor

    USB, you are still able to use a USB mouse and/or USB keyboard by setting the USB KB/Mouse Emulation option within the TOSHIBA HW Setup utility to Enabled. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.
  • Page 210 Troubleshooting USB Sleep and Charge function For more information and settings, please refer to the USB Sleep and Charge function section in Chapter 7, Setup. Problem Procedure I cannot use the "USB The setting of "USB Sleep and Charge function" may be [Disabled].

  • Page 211: Esata Device

    Troubleshooting Problem Procedure External devices Some external devices may not work when connected to a compatible port when the "USB connected to the Sleep and Charge function" is [Enabled]. compatible ports do not work when Reconnect the external device after turning ON connected to a the computer.
  • Page 212 Troubleshooting Additional memory module Please also refer to Chapter 9, Optional Devices, for further information on installing and removing memory modules. Problem Procedure If there is a memory In the event of Power indicator flashes when the malfunction, the Power computer is turned on you should initially ensure indicator will repeatedly that the installed memory module(s) are...

  • Page 213: Volume Control Dial

    Troubleshooting Problem Procedure Check within the Windows Device Manager application to ensure the sound function is enabled. If you are still unable to resolve the problem, contact your reseller, dealer or service provider. Annoying sound is In this instance you may be experiencing heard feedback from either the internal microphone or an external microphone connected to the...
  • Page 214 Troubleshooting Problem Procedure No display Try adjusting the contrast and brightness controls on the external monitor. Press the FN + F5 hot key in order to change the display priority and ensure that it is not set for the internal display panel only. Check to see if the external monitor is connected.
  • Page 215 Troubleshooting Problem Procedure You place a call, but a Make sure that the settings are correct within connection can’t be your communication application. made After making a call you Ensure that the communication application's tone can’t hear a ring or pule dialling selection feature is set correctly. Communication is cut The computer will automatically cut off off unexpectedly...

  • Page 216: Wireless Lan

    Troubleshooting Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Procedure Cannot access Make sure the computer’s wireless Wireless LAN communication switch is set to on. Bluetooth For further information on Bluetooth wireless communication, please refer to Chapter 4,...

  • Page 217: Video Playback

    Troubleshooting i.LINK (IEEE1394) device Problem Procedure i.LINK device does not Check that the cable connecting the external function device to the computer is firmly attached. Check to ensure that power is being supplied to the device and that the device is turned on. Reinstall the drivers required for the device - this can be achieved by clicking Start, Control Panel, Hardware and Sound and then clicking...

  • Page 218: Toshiba Support

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call...
  • Page 219 Troubleshooting Outside of Europe In Europe Australia Germany & Austria TOSHIBA Australia Pty. Ltd. TOSHIBA Europe (I.E.) GmbH Information Systems Division 84-92 Geschäftsbereich, Talavera Road North Ryde N.S.W. Deutschland-Österreich 2113 Sydney Hammfelddamm 8, D-41460 Neuss, Germany Canada France TOSHIBA of Canada Ltd.

  • Page 220: Chapter 11 Legal Footnotes

    Chapter 11 Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual.

  • Page 221: Memory (Main System)*2

    For optimum performance, use your computer product only under recommended conditions. Read additional restrictions under "Environmental Conditions" in your computer documentation. Contact Toshiba Technical Service and Support for more information. 64-Bit Computing ® The following section applies only to Intel...

  • Page 222: Battery Life*3

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 223: Non-Applicable Icons*8

    Legal Footnotes The actual transmission speed will be lower than the theoretical maximum speed. The wireless adapter is based on a draft 2.0 release version of the IEEE 802.11n specification and; may not be full compatible with, or support some feature (e.g., security) of, certain Wi-Fi equipment. Non-applicable Icons Certain notebook chassis are designed to accommodate all possible configurations for an entire product series.

  • Page 224: Specifications

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Refer to User’s Manual about Weight and Size. Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80% (noncondensing) Non-operating -20°C (-4°F) to 65°C (149°F) 10% to 90% (noncondensing) Wet-bulb...
  • Page 225 Specifications Power Requirements AC adaptor 90-260 volts AC 50 or 60 hertz (cycles per second) Computer 6.31 Amperes Built-in Modem This information is applicable to the models equipped with a built-in modem. Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse...
  • Page 226 Specifications Communication Data transmission and reception speed 300/1200/2400/4800/7200/9600/12000/14400/16 800/19200/21600/24000/26400/28800/31200/33 600 bps Data reception only with V.90 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/40000/41333/42666/44000/45333/ 46666/48000/49333/50666/52000/53333/54666/ 56000 bps 2400/4800/7200/9600/12000/14400 bps Transmitting level -10 dBm Receiving level -10 to -40 dBm Input/output 600 ohms ±30% impedance Error correcting MNP class 4 and ITU-T V.42 Data compression MNP class 5 and ITU-T V.42bis...

  • Page 227: Display Controller And Video Modes

    Appendix B Display Controller and Video modes Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. Due to the display panel's increased resolution, lines may appear broken in when displaying images in full-screen text mode.

  • Page 228: Wireless Lan

    Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card Specifications Form Factor PCI Express Mini Card ■ IEEE 802.11 Standard for Wireless LANS Compatibility ■...

  • Page 229: Radio Characteristics

    Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 230 Wireless LAN Wireless IEEE 802.11 Channels Sets (Revision B, G and N Draft Ver. 1.0) Frequency Range 2400-2483.5 MHz Channel ID 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457* 2462 2467* 2472* *1 Factory-set default channels *2 Refer to the sheet Approved Countries/Regions for use for the countries/regions that in which these channels can be used.
  • Page 231 Wireless LAN Wireless IEEE 802.11 Channels Sets (Revision A and N Draft Ver. 1.0) Frequency Range 5150-5850 MHz Channel ID 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 5765 5785 User’s Manual...
  • Page 232 Wireless LAN 5805 5825 * The approved channels on using are different at each country or region. When using these channels in any country or region, refer to the addendum sheet which is Approved Countries/Regions for use. The channel configuration is managed as follows: ■...

  • Page 233: Appendix D Bluetooth Wireless Technology Interoperability

    Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special interest Group. ■ When you use Bluetooth Adaptor from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth Adaptor from TOSHIBA, always change the frequency, move your computer to the area outside of the interference range of 2.4 GHz...

  • Page 234: Bluetooth Wireless Technology And Your Health

    Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
  • Page 235 ■ Consult the dealer or an experienced radio/TV technician for help. TOSHIBA is not responsible for any radio or television interference caused ® by unauthorized modification of the devices included with this Bluetooth Card from TOSHIBA, or the substitution or attachment of connecting cables and equipment other than specified by TOSHIBA.
  • Page 236 FCC radio frequency exposure limits. Nevertheless, the ® Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized. The antenna(s) used in this device are located at the upper edge of the LCD screen, and this device has been tested as portable device as defined in Section 2.1093 of FCC rules when the LCD screen is rotated 180 degree...

  • Page 237: Using Bluetooth ® Card From Toshiba Equipment In Japan

    3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. 2. Indication The indication shown below appears on this equipment.

  • Page 238: Device Authorization

    Bluetooth wireless technology Interoperability 3. TOSHIBA Direct PC Monday - Friday : 10:00-17:00 Toll Free Tel : 0120-15-1048 Direct Dial : 03-3457-4850 : 03-3457-4868 Device Authorization This device obtains the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Telecommunications Business Law.

  • Page 239: Ac Power Cord And Connectors

    Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters...
  • Page 240 AC Power Cord and Connectors Denmark: DEMKO Norway: NEMKO Finland: FIMKO Sweden: SEMKO France: LCIE Switzerland: Germany: United Kingdom: In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F.

  • Page 241: Appendix F Usage Restrictions

    This configuration is designed to work with a signal from a conventional (standard or analog) TV antenna. ■ TOSHIBA does not guarantee that signals received by satellite or cable TV receivers will work properly and does not provide technical support for them.
  • Page 242 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system AC: Alternating current ACPI: Advanced Configuration and Power Interface ASCII: American Standard Code for Information Interchange BIOS: basic input/output system bps: bits per second CD: compact disc...
  • Page 243 Glossary IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engineers I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media card OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect...
  • Page 244 Glossary alternating current (AC): Electric current that reverses its direction of flow at regular intervals. analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted. Voice communications are analog signals. application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games.
  • Page 245 Glossary bus: An interface for transmission of signals, data or electric power. byte: The representation of a single character. A sequence of eight bits treated as a single unit; also the smallest addressable unit within the system. cache memory: A section of very fast memory in which frequently used information is duplicated for quick access.
  • Page 246 Glossary compatibility: 1) The ability of one computer to accept and process data in the same manner as another computer without modifying the data or the media upon which it is being transferred. 2) the ability of one device to connect to or communicate with another system or component.
  • Page 247 Glossary device driver: A program (called a "driver") that permits a computer to communicate with a device. dialog box: A window that accepts user input to make system settings or record other information. disable: To turn a computer option off. See also enable. Digital Audio: An audio compression standard that enables high-quality transmission and real-time playback of sound files.
  • Page 248 (FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 249 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 250 Glossary interrupt request: A signal that gives a component access to the processor. I/O: Input/output. Refers to acceptance and transfer of data to and from a computer. I/O devices: Equipment used to communicate with the computer and transfer data to and from it. IrDA 1.1: An industry standard that enables cableless infrared serial data transfer at speeds of up to 4 Mbps.
  • Page 251 Glossary memory: Typically refers to the computer's main memory, where programs are run and data is temporarily stored and processed. Memory can be volatile and hold data temporarily, such as RAM, or it can be nonvolatile and hold data permanently, such as ROM. A computer's main memory is RAM.
  • Page 252 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver: A TOSHIBA utility that lets you set the parameters for various power-saving functions. program: A set of instructions a computer can execute that enables it to achieve a desired result.
  • Page 253 A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. Random Access Memory (RAM): Volatile memory that can be written to as well as read.
  • Page 254 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. USB: Universal Serial Bus. This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.
  • Page 255 Glossary window: A portion of the screen that can display its own application, document or dialog box. Often used to mean a Microsoft Windows window. Wireless LAN: Local Area Network (LAN) through wireless communication. write protection: A method for protecting a floppy diskette from accidental erasure.
  • Page 256 10-23 Bridge media slot, 1-8, 2-3, 9-3 Fingerprint Sensor indicator, 2-13 problems, 10-16 using, 9-3 FN + 1 (TOSHIBA Zooming Utility reduce), 5-5 FN + 2 (TOSHIBA Zooming Utility Cache memory, 1-3 enlarge), 5-5 Cleaning the computer, 4-44 FN + ENTER, 5-3 Connecting the i.LINK (IEEE1394)
  • Page 257 Lock, 5-3 turning on the overlays, 5-6 Mute, 5-3 Output, 5-4 Power Plan, 5-3 LAN, 1-11, 4-42 Sleep, 5-4 active indicator, 2-7 TOSHIBA Zooming Utility cable types, 4-43 (enlarge), 5-5 connecting, 4-43 TOSHIBA Zooming Utility disconnecting, 4-44 (reduce), 5-5 jack, 2-6...
  • Page 258 Touch Pad, 2-10, 4-1 Self test, 10-4 Touch Pad control buttons, 4-1 Sound system, 10-19 Ports, 1-8 System start-up, 10-4 External monitor, 1-8 TOSHIBA support, 10-25 i.LINK, 1-8 Touch Pad, 10-13 USB, 1-8 USB device, 10-16 Power USB floppy diskette drive, 10-10...
  • Page 259 2-12 microphone jack, 1-9, 2-4 Stereo speakers, 2-10 Volume control dial, 2-12 TOSHIBA Assist, 1-17 TOSHIBA ConfigFree, 1-17 TOSHIBA Disc Creator, 1-18, 4-23 TOSHIBA PC Diagnostic Tool, 1-14 TOSHIBA support, 10-25 TOSHIBA Zooming Utility, 1-14 Touch Pad, 1-7 using, 4-1...

Table of Contents