No Power, Part 1 - HP f10 Troubleshooting Manual

No Power, Part 1

32 Chapter 4 Diagnostics and Troubleshooting
No Power, Part 1
No Power
(Power LED is off)
No
Is power cord
connected from power
source to brick and
brick to system?
Yes
Using power
strip or UPS?
No
Active
Outlet
Yes
Turn off power and
disconnect power
cord
Go to next page
t5000 Troubleshooting
Flow Chart
No Power, Part 2
Plug power cord into
No
brick and power source,
then from brick to
system.
Yes
Ensure power strip or
UPS is turned on.
Turn computer off. Plug
No
power cord into different
active wall outlet.
Restart thin client
and return to start of
this chart.