Bios Settings, (F10) Utility; Using The Bios Settings; Changing Bios Settings From The Repset Utility - HP f10 Troubleshooting Manual

3

BIOS Settings, (F10) Utility

Using the BIOS Settings

Changing BIOS Settings from the repset utility

Some BIOS settings may be changed locally within the operating system without having to go through
the F10 utility
BIOS Setting
1st Boot Device
2nd Boot Device
3rd Boot Device
Boot Up NumLock
F12 Boot
Integrated Audio
Network Controller
Serial Port 1
Parallel Port
PWRON After PWR-Fail
Wake-on-PME
BIOS Wake Up
Asset Tag No
Setup Password
Power-On Password
Parallel Mode
ECP Mode Use DMA
USB Controller
External USB Ports
Halt On
Security Option
1
. This table identifies the items that can be controlled with this method.
Default Value
USB
ATA Flash
Network
Off
Enabled
Enabled
Enabled
3F8/IRQ4, other values = 2F8/IRQ3, 3E8/IRQ4,
2E8/IRQ3
378/IRQ7, other values = 278/IRQ5, 3BC/IRQ7
Former State
Enabled
Disabled
000000000000000000
blank
blank
ECP/EPP
DMA3
Enabled
Enabled
All, but Keyboard
Setup
Other Values
ATA Flash, Network, Disabled
USB, Network, Disabled
ATA Flash, USB, Disabled
On
Disabled
Disabled
Disabled
Disabled
Disabled
On, Off
Disabled
Enabled, days of the week & time
User input (18 chars)
User input (8 chars max)
User input (8 chars max)
Standard, EPP, ECP
DMA1
Disabled
Disabled
No Errors
Always
Using the BIOS Settings 19