HP f10 Troubleshooting Manual page 24

2. To release the battery from its holder, gently push the metal guard that extends above one edge
of the battery very slightly toward the rear of the unit, then lift the battery out (1).
NOTE:
Figure 2-12
3. To insert the new battery, align the replacement battery with the positive side toward the rear of
the unit. Slide one edge of the battery into the slot and push down until the guard snaps over the
edge of the battery (2).
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and
rechargeable batteries. For more information about recycling programs, go to
search for "recycle".
16 Chapter 2 Hardware Changes
Be careful not to bend the metal guard.
Removing and replacing the internal battery
Batteries, battery packs, and accumulators should not be disposed of together with the general
household waste. In order to forward them to recycling or proper disposal, please use the public
collection system or return them to HP, an authorized HP partner, or their agents.
The Taiwan EPA requires dry battery manufacturing or importing firms, in accordance with Article 15 or
the Waste Disposal Act, to indicate the recovery marks on the batteries used in sales, giveaways, or
promotions. Contact a qualified Taiwanese recycler for proper battery disposal.
http://www.hp.com and