Print Density - Olivetti d-COPIA 3013MFplus Operation Manual

Background Density:a b
1 Copy(Auto)
*********************
2 Send/Box(Auto)
Copy(Auto):
3
4 *
*********************
5

Print Density

Adjust Print Density.
Use the procedure below to adjust the Print Density.
Sys. Menu/Count.:a b
:
Document Box
;
Edit Destination
< Adjust/Maint.
*********************
Adjust/Maint.:
1 Copy Denst. Adj.
*********************
2 Send/Box Density
3 Background Density
Print Density:
2
2
3 *3
*********************
4 4
[ Exit
a b
-1
0 Normal
+1
[ Exit
a b
[ Exit
a b
4
Press the OK key. Background Density appears.
]
5
Press the  or  key to select [Copy(Auto)] or [Send/
Box(Auto)].
6
Press the OK key. This displays the density selection
screen for the mode selected in step 5. The screen
shown is the one when [Copy(Auto)] is selected.
7
Press the  or  key to select the density from [-3
Lighter] to [+3 Darker].
8
Press the OK key. Completed. is displayed and the
screen returns to the Background Density menu.
1
In the Sys. Menu/Count. menu, press the  or  key to
select [Adjust/Maint.].
]
2
Press the OK key. The Adjust/Maint. menu appears.
]
3
Press the  or  key to select [Print Density].
4
Press the OK key. Print Density appears.
8-118
Default Setting (System Menu)