Attaching Brackets To Slide Assembly - DEC 3000 Model 400S Installation & Owner's Manual

3. Orient the slide so that the arrow
is pointing upward.
4. Slide the long bracket (rear bracket)
slide assembly in the direction of the arrow.
Figure 3–1 Attaching Brackets to Slide Assembly
3
4
2
11
5. Fasten the rear bracket
8-32 screws , flat washers
6. Press up on the locking lever
and pull the race
7. Slide the short bracket (front bracket)
slide assembly in the direction of the arrow.
Installing the System on Slides
next to the locking lever
on the rear of the
6
1
13
12
14
16
15
10
to the slide assembly
, lock washers
(direction of the arrow
out of the slide assembly
on the front of the
Installing the Rackmount Server 3–3
5
7
9
8
MK428-42
using two
and nuts .
),
.