Send All Calls - AT&T Generic 3 Quick Reference Manual

To adjust ringer volume if necessary
(speaker is not active)
1 To raise the volume, press the right half of the
Volume control button labeled [
to lower the volume, press the left half of the
Volume control button labeled [

SEND ALL CALLS

To send all calls (except priority calls) immediately
to coverage
1 While on-hook, press softkey below SAC
(if shown on the display)
or Press [
or Dial Send All Calls access code
To cancel Send All Calls
1
While on-hook, press softkey below SAC again
or Press [
or Dial Send All Calls cancel code
SPEAKERPHONE
NOTE: To use this feature, your voice terminal must
be set for the Speakerphone (speak and listen)
feature.
To place or answer a call without lifting the
handset, or to use speakerphone with any feature
1 Press [
Speaker
2 Place or answer call, or access selected feature.
3 Adjust speakerphone volume if necessary:
To raise the volume, press the right half of the
Volume control button labeled [
to lower the volume, press the left half of the
Volume control button labeled [
To prevent the other party from hearing you
1 Press [
Red Mute light goes on.
2
Press [
Mute
Red Mute light goes off.
Send Calls
Send Calls
].
].
Mute
] again to resume talking to party.
]
] again
8
];
].
.
.
];
].