Three-Party Conference Calls; Enquiry - Aastra 673xi User Manual

Telephony with sip phones at the opencom 1000 communications system
Hide thumbs Also See for 673xi:
Table of Contents

Advertisement

Using the Aastra 673xi / 675xi

Three-Party Conference Calls

You are making a call, e.g. on the trunk key 1
now forward the call, execute an enquiry, switch back and forth between two sub-
scribers ("toggle") or set up a conference. You can use any available trunk key
/
/
Note
The Aastra 6751i has just one trunk key. Use the navigation keys
call (up arrow key) or to initiate a conference (down arrow key). For details, please
refer to the Aastra 6751i user guide.

Enquiry

While telephoning, you can make an enquiry to another subscriber.
Note
The enquiry function cannot be used to transfer calls on SIP telephones.
Alternatively, use the Xfer softkey resp. the Transfer key
Aastra 6730i / 6731i. Press the up arrow key on the Aastra 6751i / 6753i.
1. Press an unassigned trunk key, e.g. trunk key 2
the Aastra 6751i.
You hear the internal dialling tone. The person calling is put on hold and now
hears music on hold.
2. Now dial the call number of the subscriber desired and make the enquiry call.
3. Press the Goodbye key
4. on the Aastra 6730i / 6731i / 6753i / 6755i / 6757i: Press the trunk key where
the first caller is waiting. You are now connected with the caller on hold once
again.
If after ending the enquiry call you put down the handset, after a few seconds
you will automatically be called back with the connection on hold.
on the Aastra 6751i: Press the key labelled Cancel on the display. You are now
connected with the first caller once again.
for three-party conference calls.
to terminate the enquiry call.
, its LED indicator is lit. You can
on the
. Press the up arrow key on
to forward a
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

675xi

Table of Contents