Table of Contents
Advertisement
Using the Aastra 673xi / 675xi
Using the Aastra 673xi / 675xi
Telephoning
Making Calls
1. In order to establish a connection,
– pick up the handset or
– press the Handsfree key
mode (see Handsfree / Open-Listening Mode starting on page 16).
2. Dial a call number:
– Enter the call number using the number keys.
– Or: press the Redial key
Then select an entry with the navigation keys
softkey or pick up the handset.
– Or: Press the function key with the phone book function (please refer to
Phone Book starting on page 21). This function is for selecting a call number
from the phone book of the OpenCom 1000 communications system.
3. Wait for the connection to be set. After about five seconds, the Aastra 673xi /
675xi accepts the entire call number and dials. To speed up dialling, press the
hash key
Calling with Selective Line Seizure
If multiple trunk keys are configured for your telephone, you can seize a line selec-
tively
1. Press a trunk key
Optional: Use the left arrow key
In the display the line numbers (L1, L2...) are shown and indicate whether this
line is free and can thus be seized.
2. Dial a call number (see page 10).
10
, to make the following call in the handsfree
to call back a previously dialled call number.
after entering the call number.
/
/
. Confirm with the Dial
to seize a specific line.
or right arrow key
to select a line.
Advertisement
Table of Contents
