Table of Contents
Advertisement
Configuring the Aastra 673xi / 675xi
3. Select the 6.Restart Phone menu entry. Confirm with the right arrow key
or with the Select softkey.
4. Confirm the restart query with the Restart softkey.
The Aastra 673xi / 675xi starts and is quickly ready for operation once again.
Deleting a Local Configuration
It is possible that programming of function keys via the personal Web Configu-
rator (OCW) is deactivated by previous local programming via the Web Interface of
the Aastra 673xi / 675xi. This can make it necessary to delete the local configu-
ration of the Aastra 673xi / 675xi.
Note
The operation is analogous on the Aastra 6730i / 6731i and on the Aastra 6751i /
6753i. The key assignment is proposed on the bottom display line.
1. Press the Options key
The Options List menu card appears.
2. Use the navigation keys
with the right arrow key
The Phone Status menu card appears.
3. Use the navigation keys
Confirm with the right arrow key
The display shows Please enter the administrator password.
4. Enter the administrator password with the number keys (please refer to
Aastra 673xi / 675xi Passwords starting on page 37). Confirm with the right
arrow key
5. Confirm the display Erase local config? with the Delete softkey.
Restoring Factory Settings
It is possible that you have been operating the Aastra 673xi / 675xi with another
communications system or with an Internet SIP provider. To operate the
Aastra 673xi / 675xi with the OpenCom 1000 communications system, you should
restore factory settings.
34
(or the Service key
to select the 2.Phone Status menu entry. Confirm
or with the Select softkey.
to select 8.Erase Local Config menu entry.
or with the Enter softkey.
on the Aastra 6751i).
or with the Select softkey.
Advertisement
Table of Contents
