Answering A Call; Holding A Call - Aastra 673xi User Manual

Telephony with sip phones at the opencom 1000 communications system

Hide thumbs Also See for 673xi:

Table of Contents

Using the Aastra 673xi / 675xi

Note

If the administrator has linked a trunk key

account, you will be calling under the call number of the SIP user account. If the

trunk key is not linked, the call number of trunk key 1

Answering a Call

An incoming call is signalised via ringer, a blinking trunk key and the blinking red

LED indicator to the upper right:

To accept the call, you:

■

pick up the handset or

■

press the blinking trunk key

■

press the Handsfree key

mode (see page 16).

During call signalling you can press the Ignore softkey to suppress call signalling

(on the Aastra 6755i / 6757i). The person calling continues to hear the ringing

tone.

Note

Press a function key with the call protection function (see Call Protection starting

on page 16). This function rejects the incoming call. The person calling hears the

busy tone.

You can briefly interrupt an ongoing call:

1. Press the Hold key

2. Press the Hold key

to accept the following call in the handsfree

. The person calling now hears music on hold.

again or press the Pickup softkey to continue the call.

with a SIP user

is used.

Table of Contents

675xi