Kenwood KDC-X5000BT Instruction Manual page 13

BLUETOOTH®
To On the faceplate
While talking on the first incoming call...
Answer another
Press
incoming call and
hold the current call
Reject another
Press
incoming call
While having two active calls...
End current call and
Press
activate held call
Swap between the
Press
current call and
held call
Adjust the phone Turn the volume knob during a
volume call.
[00] to [35] • This adjustment will not affect the
(Default: [15]) volume of the other sources.
Switch between
Press
hands-free and
• Operations may vary according to
private talk modes
the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the
following table), then press the knob.
3 2
Repeat step until the desired item is selected or
activated.
4
Press and hold to exit.
To return to the previous setting item, press
.
.
.
.
during a call.
.
MIC GAIN –10 — +10 (–4): The sensitivity of the microphone increases as the number increased.
NR LEVEL –5 — +5 (0): Adjust the noise reduction level until the least noise is being heard
during a phone conversation.
ECHO CANCEL
–5 — +5 (0): Adjust the echo cancellation delay time until the least echo is being
heard during a phone conversation.
Make the settings for receiving a call
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following table), then press
the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
SETTINGS
AUTO ANSWER 1 — 30: The unit answers incoming call automatically in the selected time (in
seconds). ; OFF: Cancels.
BATT/SIGNAL* AUTO: Shows the strength of the battery and signal when the unit detects a Bluetooth
device and the Bluetooth device is connected. ; OFF: Cancels. Clock time is shown.
* Functionality depends on the type of the phone used.
Make a call
You can make a call from the call history, phonebook, or dialing the number. Call by
voice is also possible if your mobile phone has the feature.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item ( 12), then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
Default: XX
.
Default: XX
.
ENGLISH
11