1. Manuals
  2. Brands
  3. Kenwood Manuals
  4. Car Receiver
  5. KDC-X5200BTM
  6. Instruction manual

Kenwood KDC-X5200BTM Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

KDC-X5200BTM
CD-RECEIVER
INSTRUCTION MANUAL
© 2017 JVC KENWOOD Corporation
B5A-2119-00 (M2N)

Advertisement

Table of Contents
loading

Related Manuals for Kenwood KDC-X5200BTM

Summary of Contents for Kenwood KDC-X5200BTM

  • Page 1 KDC-X5200BTM CD-RECEIVER INSTRUCTION MANUAL © 2017 JVC KENWOOD Corporation B5A-2119-00 (M2N)

  • Page 2: Table Of Contents

    CONTENTS BEFORE USE BEFORE USE IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe BASICS Warning and Caution in this manual. GETTING STARTED • Please keep the manual in a safe and accessible place for future reference. 1 Select the display language WARNING and cancel the demonstration...

  • Page 3: Basics

    BASICS Faceplate Remote control (RC-406) Attach Remote sensor Lights up when (Do not expose to bright Volume Display Bluetooth connection sunlight.) knob window is established. ( 13) Detach Pull out the insulation sheet when using for the first time. How to reset Auxiliary cable from the Detach rear of the unit.

  • Page 4: Getting Started

    GETTING STARTED Set the clock and date Press the volume knob to enter [FUNCTION]. Turn the volume knob to select [CLOCK], then press the knob. To adjust the clock Turn the volume knob to select [CLOCK ADJUST], then press the knob. Turn the volume knob to make the settings, then press the knob.
  • Page 5 YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). ON: LCD DISPLAY zone illumination changes to white color. ; xxxx For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>. OFF: LCD DISPLAY zone illumination remains as [COLOR FACTORY RESET YES: Resets the settings to default (except the stored station). ;...

  • Page 6: Radio

    RADIO Other settings Press the volume knob to enter [FUNCTION]. Turn the volume knob to select an item (see the following table), then press the knob. Repeat step until the desired item is selected/activated or follow the instructions stated on the selected item. Press and hold to exit.

  • Page 7: Aux

    RADIO Preparation: PTY SEARCH 1 Turn the volume knob to select the available Program Type, then press Select [ON] for [BUILT-IN AUX] for [SOURCE SELECT]. ( 5) the knob. 2 Turn the volume knob to select the PTY language (ENGLISH/FRENCH/ GERMAN), then press the knob.

  • Page 8: Cd/Usb/Ipod/Android

    When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.
  • Page 9 While in ANDROID source, press 5 repeatedly. Skip Search (applicable only for iPod USB and ANDROID source) BROWSE MODE : Control Android device from this unit via KENWOOD Press S / T to search at a preset skip search ratio. MUSIC PLAY application installed in the Android device.
  • Page 10 Repeat steps to select the following drives. Preparation: Install the latest version of KENWOOD Remote application on your device SKIP SEARCH 0.5%/1%/5%/10%: While listening to iPod USB or ANDROID source, selects before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

  • Page 11: Spotify

    Spotify Preparation: On the faceplate On the remote control Install the latest version of the Spotify application on your device (iPhone/ Repeat play * Press repeatedly. iPod touch), then create an account and log in to Spotify. ( Not available ) •...

  • Page 12: Bluetooth

    BLUETOOTH® Spotify BLUETOOTH — Connection Search for a song or station Press Supported Bluetooth profiles Turn the volume knob to select a list type, then press the knob. – Hands-Free Profile (HFP) The list types displayed differ depending on the information sent –...
  • Page 13 “PAIRING OK” appears when pairing is completed. – [AUTO PAIRING] is set to [ON]. ( 17) – KENWOOD MUSIC PLAY application is installed on the Android device Once pairing is completed, Bluetooth connection is established ( 8) and [BROWSE MODE] is selected. ( 9) automatically.
  • Page 14 BLUETOOTH® BLUETOOTH — Mobile phone On the faceplate On the remote control While talking on the first incoming call... Answer another Press Press incoming call and hold the current call Reject another Press Press incoming call While having two active calls... End current call and Press Receive a call...
  • Page 15 BLUETOOTH® Default: XX Improve the voice quality While talking on the phone... SETTINGS Press the volume knob to enter [FUNCTION]. AUTO ANSWER 1 to 30: The unit answers incoming call automatically in the selected time (in Turn the volume knob to select an item (see the following seconds). ;...
  • Page 16 BLUETOOTH® Make a call using voice recognition PHONE BOOK (Applicable only if the phone supports PBAP.) 1 Turn the volume knob quickly to enter alphabet search mode (if the Press and hold to activate the voice recognition of the phonebook contains many contacts). connected phone.
  • Page 17 BLUETOOTH® Other settings Bluetooth test mode Press the volume knob to enter [FUNCTION]. You can check the connectivity of the supported profile between the Turn the volume knob to select an item (see the following table), Bluetooth device and the unit. then press the knob.
  • Page 18 Press Select group or Press J / K. Press Preparation: folder Install the latest version of KENWOOD Remote application on your device Reverse/Forward Press S / T. Press S /  before connecting. For more information, visit <www.kenwood.com/cs/ce/>. skip Press the volume knob to enter [FUNCTION].
  • Page 19 BLUETOOTH® Default: XX Listen to iPhone/iPod via Bluetooth REMOTE APP You can listen to the songs on the iPhone/iPod via Bluetooth on this unit. SELECT Select the device (IOS or ANDROID) to use the application. Press repeatedly to select iPod BT. YES: Selects iPhone/iPod to use the application via Bluetooth or connected •...

  • Page 20: Audio Settings

    AUDIO SETTINGS While listening to any source... NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/POWERFUL/USER: PRESET EQ Press AUDIO to enter [AUDIO CONTROL] directly. Selects a preset equalizer suitable to the music genre. (Select [USER] to Turn the volume knob to select an item (see the following table), use the settings made in [MANUAL EQ].) then press the knob.
  • Page 21 AUDIO SETTINGS Depending on the crossover type you have selected ( 5), 2-way Crossover settings SPEAKER SIZE crossover or 3-way crossover setting items will be shown. ( 22) Below are the available setting items for 2-way crossover and 3-way X’OVER By default, 2-way crossover type is selected.
  • Page 22 AUDIO SETTINGS 2-way crossover setting items 3-way crossover setting items SPEAKER SIZE SPEAKER SIZE FRONT SIZE 8CM/10CM/12CM/13CM/16CM/17CM/18CM/ TWEETER SMALL/MIDDLE/LARGE 4×6/5×7/6×8/6×9/7×10 MID RANGE 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9 TWEETER SMALL/MIDDLE/LARGE/NONE (not connected) WOOFER * 16CM/20CM/25CM/30CM/38CM OVER/NONE (not connected) REAR 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9/ X ' OVER 7×10/NONE (not connected) TWEETER HPF FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/ SUBWOOFER *...
  • Page 23 AUDIO SETTINGS • Before making an adjustment for [DISTANCE] and [GAIN] of [DTA SETTINGS], select the Digital Time Alignment settings speaker you want to adjust: Digital Time Alignment sets the delay time of the speaker output to When 2-way crossover is selected: create a more suitable environment for your vehicle.

  • Page 24: Display Settings

    DISPLAY SETTINGS Zone identification for color and brightness settings Default: XX DISPLAY COLOR Select color for ALL ZONE, LCD DISPLAY and KEY separately. SELECT 1 Select a zone. (See the illustration on the left column.) 2 Select a color for the selected zone. INITIAL COLOR/VARIABLE SCAN/CUSTOM R/G/B/preset colors* To make your own color, select [CUSTOM R/G/B].

  • Page 25: Troubleshooting

    TROUBLESHOOTING Symptom Remedy Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. Correct characters are not • This unit can only display uppercase letters, • Check the cords and connections. displayed (e.g. album name). numbers, and a limited number of symbols. •...
  • Page 26 No Bluetooth device is unit. ( 28) • Reset the unit. ( 3) detected. • Make sure KENWOOD MUSIC PLAY APP is installed on Cannot playback at Bluetooth pairing cannot • Make sure you have entered the same PIN code to both [BROWSE MODE].

  • Page 27: References

    More information feature or phonebook transfer. For: – Latest firmware updates and latest compatible item list “NO ENTRY”/“NO PAIR” There is no registered device connected/found via – KENWOOD original application Bluetooth. – Any other latest information Visit <www.kenwood.com/cs/ce/>. “ERROR” Try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.
  • Page 28 – iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. • Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.

  • Page 29: Installation/ Connection

    INSTALLATION/CONNECTION REFERENCES Change the display information Warning Each time you press DISP, the display information changes. • The unit can only be used with a 12 V DC power supply, negative ground. • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information •...
  • Page 30 INSTALLATION/CONNECTION Part list for installation Installing the unit (in-dash mounting) (A) Faceplate (B) Trim plate Do the required wiring. ( 31) Hook on the top side (C) Mounting sleeve (D) Wiring harness Dashboard of Orientate the trim your car plate as illustrated before fitting.

  • Page 31: Wiring Connection

    : Earth (ground) connection Purple ] : Rear speaker (right) Brown For 3-way crossover: Tweeter (right) Purple/black [ To connect the Kenwood navigation (Mute control wire) system, refer your navigation manual MUTE Gray ] : Front speaker (right) For 3-way crossover: Mid range speaker (right)

  • Page 32: Installation/Connection Specifications

    SPECIFICATIONS INSTALLATION/CONNECTION Connecting external components Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space) Usable Sensitivity (S/N = 26 dB) 0.71 μV/75 Ω USB cable Quieting Sensitivity (S/N = 46 dB) 2.0 μV/75 Ω (DC 5V 1.5A) Microphone input jack ( 12) Frequency Response (±3 dB) 30 Hz — 15 kHz Signal-to-Noise Ratio (MONO) 64 dB Stereo Separation (1 kHz)
  • Page 33 SPECIFICATIONS USB Standard USB 1.1/USB 2.0 Full Speed Maximum Output Power 50 W × 4 File System FAT12/16/32 Full Bandwidth Power 22 W × 4 (at less than 1 % THD) Maximum Supply Current DC 5 V   1.5 A Speaker Impedance 4 Ω — 8 Ω MP3 Decode Compliant with MPEG-1/2 Audio Layer-3 Tone Action Band 1: 62.5 Hz ±9 dB Band 2: 100 Hz ±9 dB...
  • Page 34 ‫ﻫﺬﺍ ﺍﻟﻤﻠﺼﻖ ﻋﻠﻰ ﺍﻟﺸﺎﺳﻴﻪ / ﺍﻟﺼﻨﺪﻭﻕ ﻭﻳﻌﻨﻲ ﺃﻥ ﺍﻟﻤﻜﻮﻥ ﻳﺴﺘﺨﺪﻡ ﺃﺷﻌﺔ ﻟﻴﺰﺭ ﻣﺼﻨﻔﺔ ﻣﻦ‬ English ‫ﺍﻟﺪﺭﺟﺔ ﺍﻷﻭﻟﻰ. ﺑﻤﺎ ﻳﻌﻨﻲ ﺃﻥ ﺍﻟﻮﺣﺪﺓ ﺗﺴﺘﻌﻤﻞ ﺃﺷﻌﺔ ﻟﻴﺰﺭ ﻣﻦ ﺩﺭﺟﺔ ﺿﻌﻴﻔﺔ. ﻻ ﻳﻮﺟﺪ ﺧﻄﺮ‬ Hereby, JVCKENWOOD declares that the radio equipment “KDC-X5200BTM” is in compliance .‫ﺍﻧﺒﻌﺎﺙ ﺇﺷﻌﺎﻉ ﺧﻄﻴﺮ ﺧﺎﺭﺝ ﺍﻟﻮﺣﺪﺓ‬ with Directive 2014/53/EU.
  • Page 35 • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE trademarks and trade names are those of their respective owners.
  • Page 36 ‫ﺍﻟﻤﻮﺍﺻﻔﺎﺕ‬ 4 × ‫05 ﻭﺍﻁ‬ ‫ﻗﺪﺭﺓ ﺍﻟﺨﺮﺝ ﺍﻟﻘﺼﻮﻯ‬ ‫ ﺳﺮﻋﺔ ﻗﺼﻮﻯ‬USB 2.0/USB 1.1 USB ‫ﻣﻌﻴﺎﺭ‬ ‫22 ﻭﺍﻁ × 4 )ﻋﻨﺪ ﺃﻗﻞ ﻣﻦ 1 % ﺇﺟﻤﺎﻟﻲ ﺗﺸﺘﺖ‬ ‫ﻗﺪﺭﺓ ﺳﻌﺔ ﻧﻄﺎﻕ ﺍﻟﺒﺚ ﺍﻟﻜﺎﻣﻞ‬ ‫ﻧﻈﺎﻡ ﺍﻟﻤﻠﻔﺎﺕ‬ 32/16/FAT12 (‫ﺍﻟﺼﻮﺕ‬ ‫5.1 ﺃﻣﺒﻴﺮ‬ ‫ﺗﻴﺎﺭ ﻣﺒﺎﺷﺮ 5 ﻓﻮﻟﺖ‬ ‫ﺍﻟﺤﺪ...
  • Page 37 ‫ﺍﻟﻤﻮﺍﺻﻔﺎﺕ‬ ‫ﺍﻟﺘﺮﻛﻴﺐ/ﺍﻟﺘﻮﺻﻴﻞ‬ ‫ﺗﻮﺻﻴﻞ ﻣﻜﻮﻧﺎﺕ ﺧﺎﺭﺟﻴﺔ‬ ‫5.78 ﻣﻴﺠﺎ ﻫﺮﺗﺰ — 0.801 ﻣﻴﺠﺎ ﻫﺮﺗﺰ‬ ‫ﻧﻄﺎﻕ ﺍﻟﺘﺮﺩﺩ‬ (‫)ﻟﻤﺴﺎﻓﺔ 05 ﻛﻴﻠﻮ ﻫﺮﺗﺰ‬ ‫17.0 ﻣﻴﻜﺮﻭ ﻓﻮﻟﺖ/ 57 ﺍﻭﻡ‬ ‫ﺩﺭﺟﺔ ﺍﻟﺤﺴﺎﺳﻴﺔ ﺍﻟﻤﺴﺘﺨﺪﻣﺔ‬ USB ‫ﻛﺎﺑﻞ‬ (‫ = 62 ﺩﻳﺴﻴﺒﻞ‬S/N) (‫5.1 ﺃﻣﺒﻴﺮ‬ ‫)ﺗﻴﺎﺭ ﻣﺒﺎﺷﺮ 5 ﻓﻮﻟﺖ‬ (12 ) ‫ﻣﻘﺒﺲ ﺗﻮﺻﻴﻞ ﺍﻟﻤﻴﻜﺮﻭﻓﻮﻥ‬ ‫0.2 ﻣﻴﻜﺮﻭ...
  • Page 38 ‫ﺃﺳﻮﺩ‬ (‫: ﺍﻟﺴﻤﺎﻋﺔ ﺍﻟﺨﻠﻔﻴﺔ )ﺍﻟﻴﻤﻨﻰ‬ ] ‫ﺃﺭﺟﻮﺍﻧﻴﺔ‬ (‫ﻟﻠﺘﻌﺪﻳﺔ 3 ﻗﻨﻮﺍﺕ: ﻣﻜﺒﺮ ﺍﻟﺼﻮﺕ )ﺍﻟﻴﻤﻨﻰ‬ [ ‫ﺃﺭﺟﻮﺍﻧﻴﺔ/ﺃﺳﻮﺩ‬ ‫ﺑﻨﻲ‬ ،Kenwood ‫ﻟﺘﻮﺻﻴﻞ ﻧﻈﺎﻡ ﺍﻟﻤﻼﺣﺔ ﻣﻦ‬ (‫: ﺍﻟﺴﻤﺎﻋﺔ ﺍﻷﻣﺎﻣﻴﺔ )ﺍﻟﻴﻤﻨﻰ‬ ] ‫ﺭﻣﺎﺩﻱ‬ ‫ﻋﻠﻴﻚ ﺑﺎﻟﺮﺟﻮﻉ ﺇﻟﻰ ﺩﻟﻴﻞ ﺍﻟﻤﻼﺣﺔ‬ ‫)ﺳﻠﻚ ﺍﻟﺘﺤﻜﻢ ﻓﻲ ﻛﺘﻢ‬ MUTE ‫ﻟﻠﺘﻌﺪﻳﺔ 3 ﻗﻨﻮﺍﺕ: ﺳﻤﺎﻋﺔ ﻣﺘﻮﺳﻄﺔ ﺍﻟﻨﻄﺎﻕ‬...
  • Page 39 ‫ﺍﻟﺘﺮﻛﻴﺐ/ﺍﻟﺘﻮﺻﻴﻞ‬ ‫ﻗﺎﺋﻤﺔ ﻗﻄﻊ ﺍﻟﻐﻴﺎﺭ ﺍﻟﻤﺴﺘﺨﺪﻣﺔ ﻓﻲ ﺍﻟﺘﺮﻛﻴﺐ‬ (‫ﺗﺮﻛﻴﺐ ﺍﻟﻮﺣﺪﺓ )ﺩﺍﺧﻞ ﺗﺎﺑﻠﻮ ﺍﻟﺴﻴﺎﺭﺓ‬ ‫( ﻭﺣﺔ ﺍﻟﺰﻳﻨﺔ‬B) ‫( ﻭﺍﺟﻬﺔ ﺍﻟﺠﻬﺎﺯ‬A) ‫ﻗﻢ ﺑﺘﻮﺻﻴﻞ ﺍﻷﺳﻼﻙ‬ (31 ) .‫ﺍﻟﻤﻄﻠﻮﺑﺔ‬ ‫ﺍﻟﺨﻄﺎﻑ ﻓﻲ‬ ‫ﺍﻟﺠﺎﻧﺐ ﺍﻟﻌﻠﻮﻱ‬ ‫( ﺿﻔﻴﺮﺓ ﺍﻷﺳﻼﻙ‬D) ‫( ﺇﻃﺎﺭ ﺍﻟﺘﺮﻛﻴﺐ‬C) ‫ﺗﺎﺑﻠﻮﻩ ﺍﻟﺴﻴﺎﺭﺓ‬ ‫ﻳﺘﻢ ﺗﻮﺟﻴﻪ ﻟﻮﺣﺔ‬ ‫ﺍﻟﺰﻳﻨﺔ ﺍﻷﻣﺎﻣﻴﺔ ﻛﻤﺎ ﻫﻮ‬ .‫ﻣﻮﺿﺢ...
  • Page 40 ‫ﺍﻟﺘﺮﻛﻴﺐ/ﺍﻟﺘﻮﺻﻴﻞ‬ ‫ﻣﺮﺍﺟﻊ‬ ‫ﺗﺤﺬﻳﺮ‬ ‫ﺗﻐﻴﻴﺮ ﻣﻌﻠﻮﻣﺎﺕ ﺍﻟﺸﺎﺷﺔ‬ .‫، ﺗﺘﻐﻴﺮ ﻣﻌﻠﻮﻣﺎﺕ ﺍﻟﺸﺎﺷﺔ‬DISP ‫ﻛﻠﻤﺎ ﺿﻐﻄﺖ ﻋﻠﻰ‬ .‫• ﻳﻤﻜﻦ ﺍﺳﺘﺨﺪﺍﻡ ﺍﻟﻮﺣﺪﺓ ﻓﻘﻂ ﻓﻲ ﺳﻴﺎﺭﺓ ﺑﻬﺎ ﻣﺼﺪﺭ ﺗﻴﺎﺭ ﻣﺒﺎﺷﺮ 21 ﻓﻮﻟﺖ، ﻭﺗﺄﺭﻳﺾ ﺳﻠﺒﻲ‬ ‫“ ﺃﻭ‬NO INFO” ‫“ ﺃﻭ‬NO TEXT” ‫• ﺇﺫﺍ ﻟﻢ ﺗﻜﻦ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ ﻣﺘﻮﻓﺮﺓ ﺃﻭ ﺍﻧﻬﺎ ﻏﻴﺮ ﻣﺴﺠﻠﺔ، ﻳﻈﻬﺮ‬ .‫•...
  • Page 41 7 Plus ،7 ،SE ،6S Plus ،6S ،6 Plus ،6 ،5C ،5S ،5 ،iPhone 4S – .iPod ‫“ ﺃﻭ ” “ ﻓﻲ ﺟﻬﺎﺯ‬KENWOOD” ‫ ﻓﻲ ﺣﺎﻟﺔ ﻇﻬﻮﺭ‬iPod ‫• ﻟﻦ ﻳﻤﻜﻨﻚ ﺗﺸﻐﻴﻞ ﺟﻬﺎﺯ‬ ‫، ﻗﺪ ﻻ ﺗﻌﻤﻞ ﺑﻌﺾ‬iPhone/iPod ‫• ﺍﻋﺘﻤﺎﺩﺍ ﻋﻠﻰ ﻧﺴﺨﺔ ﻧﻈﺎﻡ ﺍﻟﺘﺸﻐﻴﻞ ﺍﻟﺨﺎﺹ ﺑﺠﻬﺎﺯ‬...
  • Page 42 ‫ﻻ ﻳﻮﺟﺪ ﺟﻬﺎﺯ ﻣﺴﺠﻞ ﻣﻮﺻﻞ/ﺗﻢ ﺍﻟﻌﺜﻮﺭ ﻋﻠﻴﻪ ﻋﺒﺮ‬ “NO PAIR”/“NO ENTRY” ‫ﻟـ: – ﺁﺧﺮ ﺗﺤﺪﻳﺜﺎﺕ ﺍﻟﺒﺮﺍﻣﺞ ﺍﻟﺜﺎﺑﺘﺔ ﻭﺍﺣﺪﺙ ﻗﺎﺋﻤﺔ ﺑﻨﻮﺩ ﻣﺘﻮﺍﻓﻘﺔ‬ .Bluetooth ‫ ﺍﻻﺻﻠﻲ‬KENWOOD ‫– ﺍﻟﺘﻄﺒﻴﻖ‬ “ERROR” ‫ﺃﻋﺪ ﺇﺟﺮﺍﺀ ﺍﻟﻌﻤﻠﻴﺔ ﻣﺮﺓ ﺃﺧﺮﻯ. ﺇﺫﺍ ﻇﻬﺮﺕ ﺍﻟﺮﺳﺎﻟﺔ‬ ‫– ﺃﻱ ﻣﻦ ﺍﺣﺪﺙ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ ﺍﻻﺧﺮﻯ‬ “ERROR”...
  • Page 43 ‫ﻻ ﻳﻤﻜﻦ ﺇﺟﺮﺍﺀ ﺍﻗﺮﺍﻥ‬ (28 ) .‫ﺍﻟﻰ ﺍﻟﻮﺣﺪﺓ‬ .Bluetooth ‫ﻣﻦ ﺍﻟﻮﺣﺪﺓ ﻭﺟﻬﺎﺯ‬ .Bluetooth KENWOOD MUSIC PLAY APP ‫• ﺗﺄﻛﺪ ﻣﻦ ﺗﺜﺒﻴﺖ ﺍﻟﺘﻄﺒﻴﻖ‬ ‫ﻻ ﻳﻤﻜﻦ ﺍﻟﺘﺸﻐﻴﻞ ﻓﻲ‬ ‫• ﻗﻢ ﺑﺤﺬﻑ ﻣﻌﻠﻮﻣﺎﺕ ﺍﻹﻗﺮﺍﻥ ﻣﻦ ﻛﻞ ﻣﻦ ﺍﻟﻮﺣﺪﺓ ﻭﺟﻬﺎﺯ‬ (8 ) .Android ‫ﻓﻲ ﺟﻬﺎﺯ‬...
  • Page 44 ‫ﺍﻟﺒﺤﺚ ﻋﻦ ﺍﻻﻋﻄﺎﻝ ﻭﺍﻻﺻﻼﺡ‬ ‫ﻣﻌﺎﻟﺠﺔ ﺍﻷﻋﻄﺎﻝ‬ ‫ﺍﻻﻋﺮﺍﺽ‬ ‫ﻣﻌﺎﻟﺠﺔ ﺍﻷﻋﻄﺎﻝ‬ ‫ﺍﻻﻋﺮﺍﺽ‬ .‫• ﺍﺿﺒﻂ ﻣﺴﺘﻮﻯ ﻗﻮﺓ ﺍﻟﺼﻮﺕ ﻋﻠﻰ ﺍﻓﻀﻞ ﻣﺴﺘﻮﻯ ﻣﻤﻜﻦ‬ .‫ﻻ ﻳﻤﻜﻦ ﺳﻤﺎﻉ ﺍﻟﺼﻮﺕ‬ ‫• ﺗﺴﺘﻄﻴﻊ ﻫﺬﻩ ﺍﻟﻮﺣﺪﺓ ﻓﻘﻂ ﻋﺮﺽ ﺍﻟﺤﺮﻭﻑ ﺍﻟﻬﺠﺎﺋﻴﺔ‬ ‫ﻻ ﻳﺘﻢ ﻋﺮﺽ ﺍﻟﺤﺮﻭﻑ‬ .‫• ﺍﻓﺤﺺ ﺍﻻﺳﻼﻙ ﻭﺍﻟﺘﻮﺻﻴﻼﺕ‬ .‫ﺍﻟﻜﺒﻴﺮﺓ ﻭﺍﻷﺭﻗﺎﻡ ﻭﻋﺪﺩ ﻣﺤﺪﻭﺩ ﻣﻦ ﺍﻟﺮﻣﻮﺯ‬ ‫ﺍﻟﺼﺤﻴﺤﺔ...
  • Page 45 ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺸﺎﺷﺔ‬ XX :‫ﺍﻓﺘﺮﺍﺿﻲ‬ ‫ﺗﺤﺪﻳﺪ ﻣﻨﻄﻘﺔ ﻹﻋﺪﺍﺩﺍﺕ ﺍﻟﻠﻮﻥ ﻭﺍﻟﺴﻄﻮﻉ‬ DISPLAY .‫ ﺑﺸﻜﻞ ﻣﻨﻔﺼﻞ‬KEY ‫ ﻭ‬LCD DISPLAY ‫ ﻭ‬ALL ZONE ‫ﺍﺧﺘﺮ ﻟﻮﻥ ﺍﻟﻰ‬ COLOR SELECT (.‫1 ﺍﺧﺘﺮ ﻣﻨﻄﻘﺔ. )ﺭﺍﺟﻊ ﺍﻻﺿﺎﺀﺓ ﻋﻠﻰ ﺍﻟﻌﻤﻮﺩ ﺍﻻﻳﺴﺮ‬ .‫2 ﺣﺪﺩ ﻟﻮ ﻧ ﹰ ﺎ ﻟﻠﻤﻨﻄﻘﺔ ﺍﻟﻤﺤﺪﺩﺓ‬ ‫/ﺍﻻﻟﻮﺍﻥ...
  • Page 46 ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺼﻮﺕ‬ ‫[، ﺍﺧﺘﺮ ﺍﻟﺴﻤﺎﻋﺔ ﺍﻟﺘﻲ‬DTA SETTINGS] ‫[ ﻓﻲ‬GAIN] ‫[ ﻭ‬DISTANCE] ‫• ﻗﺒﻞ ﻋﻤﻞ ﺍﻟﻀﺒﻂ ﻟﻠﺒﻨﺪ‬ ‫ﺍﻋﺪﺍﺩﺍﺕ ﻣﺤﺎﺫﺍﺓ ﺍﻟﻮﻗﺖ ﺍﻟﺮﻗﻤﻲ‬ :‫ﺗﺮﻳﺪ ﺿﺒﻄﻬﺎ‬ :‫ﻋﻨﺪﻣﺎ ﺗﻜﻮﻥ ﺗﻌﺪﻳﺔ ﻗﻨﺎﺗﻴﻦ ﻣﺨﺘﺎﺭﺓ‬ ‫ﻭﻇﻴﻔﺔ ﻣﺤﺎﺫﺍﺓ ﺍﻟﻮﻗﺖ ﺍﻟﺮﻗﻤﻲ ﺗﻀﺒﻂ ﻭﻗﺖ ﺍﻟﺘﺄﺧﻴﺮ ﻻﺧﺮﺍﺝ ﺍﻟﺴﻤﺎﻋﺔ ﻣﻦ ﺍﺟﻞ ﺧﻠﻖ ﺑﻴﺌﺔ ﺍﻛﺜﺮ‬ .‫ﻣﻼﺋﻤﺔ...
  • Page 47 ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺼﻮﺕ‬ ‫ﺑﻨﻮﺩ ﺇﻋﺪﺍﺩ ﺗﻌﺪﻳﺔ 3 ﻗﻨﻮﺍﺕ‬ ‫ﺑﻨﻮﺩ ﺇﻋﺪﺍﺩ ﺗﻌﺪﻳﺔ 2 ﻗﻨﻮﺍﺕ‬ SPEAKER SIZE SPEAKER SIZE /18CM/17CM/16CM/13CM/12CM/10CM/8CM SIZE FRONT LARGE/MIDDLE/SMALL TWEETER 7×10/6×9/6×8/5×7/4×6 MID RANGE 6×9/6×8/5×7/4×6/18CM/17CM/16CM/13CM/12CM/10CM/8CM (‫ )ﻏﻴﺮ ﻣﻮﺻﻮﻝ‬NONE/LARGE/MIDDLE/SMALL TWEETER (‫ )ﻏﻴﺮ ﻣﻮﺻﻮﻝ‬NONE/38CM OVER/30CM/25CM/20CM/16CM WOOFER * /6×9/6×8/5×7/4×6/18CM/17CM/16CM/13CM/12CM/10CM/8CM REAR X ' OVER (‫...
  • Page 48 ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺼﻮﺕ‬ ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺘﻌﺪﻳﺔ‬ ‫ﻭﻓﻘﺎ ﻟﻨﻮﻉ ﺍﻟﺘﻌﺪﻳﺔ ﺍﻟﺬﻱ ﺍﺧﺘﺮﺗﻪ ) 5(، ﺳﻴﺘﻢ ﺍﻇﻬﺎﺭ ﺑﻨﻮﺩ ﺇﻋﺪﺍﺩﺍﺕ ﺗﻌﺪﻳﺔ‬ SPEAKER SIZE (22 ) .‫ﺑﻘﺎﺗﻴﻦ ﺃﻭ ﺑﻌﺪﻳﺔ 3 ﻗﻨﻮﺍﺕ‬ .‫ﻓﻴﻤﺎ ﻳﻠﻲ ﺑﻨﻮﺩ ﺍﻹﻋﺪﺍﺩ ﺍﻟﻤﺘﺎﺣﺔ ﻟﻠﺘﻌﺪﻳﺔ ﺑﻘﺎﺗﻴﻦ ﺃﻭ ﺑﻌﺪﻳﺔ 3 ﻗﻨﻮﺍﺕ‬ .‫ﻓﻲ ﺍﻟﺘﻬﻴﺌﺔ ﺍﺍﻓﺘﺮﺍﺿﻴﺔ، ﺗﻢ ﺍﺧﺘﻴﺎﺭ ﻧﻮﻉ ﺍﻟﺘﻌﺪﻳﺔ ﺑﻘﻨﺎﺗﻴﻦ‬ X’OVER .‫32،...
  • Page 49 ‫ﺇﻋﺪﺍﺩﺍﺕ ﺍﻟﺼﻮﺕ‬ ...‫ﺃﺛﻨﺎﺀ ﺍﻻﺳﺘﻤﺎﻉ ﺇﻟﻰ ﺃﻱ ﻣﺼﺪﺭ‬ :USER/POWERFUL/JAZZ/TOP40/EASY/POPS/ROCK/NATURAL PRESET EQ .‫[ ﻣﺒﺎﺷﺮﺓ‬AUDIO CONTROL] ‫ ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ‬AUDIO ‫ﺍﺿﻐﻂ‬ ‫ﻳﺤﺪﺩ ﺍﻟﻤ ﹸ ﻌﺎ ﺩ ﹺ ﻝ ﺍﻟﻤﻀﺒﻮﻁ ﻣﺴﺒﻘ ﺎ ﹰ ﻭﺍﻟﻤﻨﺎﺳﺐ ﻟﻨﻮﻉ ﺍﻟﻤﻮﺳﻴﻘﻰ. )ﺍﺧﺘﺮ‬ ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﺑﻨﺪ )ﺭﺍﺟﻊ ﺍﻟﺠﺪﻭﻝ ﺍﻟﺘﺎﻟﻲ(، ﺛﻢ ﺍﺿﻐﻂ‬ (.[MANUAL EQ] ‫[ ﻻﺳﺘﺨﺪﺍﻡ...
  • Page 50 BLUETOOTH® Bluetooth ‫ ﻋﺒﺮ‬iPod/iPhone ‫ﺍﻻﺳﺘﻤﺎﻉ ﺍﻟﻰ ﺟﻬﺎﺯ‬ XX :‫ﺍﻓﺘﺮﺍﺿﻲ‬ .‫ ﻋﻠﻰ ﻫﺬﻩ ﺍﻟﻮﺣﺪﺓ‬Bluetooth ‫ ﻋﺒﺮ‬iPod/iPhone ‫ﻳﻤﻜﻨﻚ ﺍﻻﺳﺘﻤﺎﻉ ﺇﻟﻰ ﺍﻻﻏﺎﻧﻲ ﻋﻠﻰ ﺟﻬﺎﺯ‬ REMOTE APP .‫( ﻻﺳﺘﺨﺪﺍﻡ ﺍﻟﺘﻄﺒﻴﻖ‬ANDROID ‫ ﺍﻭ‬IOS) ‫ﺍﺧﺘﺮ ﺍﻟﺠﻬﺎﺯ‬ SELECT .iPod BT ‫ﺑﺸﻜﻞ ﻣﺘﻜﺮﺭ ﻻﺧﺘﻴﺎﺭ‬ ‫ﺍﺿﻐﻂ‬ ‫ ﺍﻭ‬Bluetooth ‫ ﻻﺳﺘﺨﺪﺍﻡ ﺍﻟﺘﻄﺒﻴﻖ ﻋﺒﺮ‬iPod/iPhone ‫ : ﻳﺨﺘﺎﺭ ﺟﻬﺎﺯ‬YES iPhone/iPod ‫...
  • Page 51 ‫ﻋﻠﻰ ﻏﻄﺎﺀ ﺍﻟﺤﻤﺎﻳﺔ‬ ‫ﺇﻟﻰ‬ :‫ﺍﻟﺘﺤﻀﻴﺮ‬ ‫ﺗﺸﻐﻴﻞ/ﺗﻮﻗﻒ ﻣﺆﻗﺖ‬ ‫ﺍﺿﻐﻂ‬ ‫ﺍﺿﻐﻂ‬ ‫ ﻋﻠﻰ ﺟﻬﺎﺯ ﻙ ﻗﺒﻞ ﺍﻟﺘﻮﺻﻴﻞ. ﻟﻤﺰﻳﺪ‬KENWOOD Remote ‫ﻗﻢ ﺑﺘﺜﺒﻴﺖ ﺍﺣﺪﺙ ﺍﺻﺪﺍﺭ ﻣﻦ ﺍﻟﺘﻄﺒﻴﻖ‬ .J / K ‫ﺍﺿﻐﻂ‬ ‫ﺗﺤﺪﻳﺪ ﻣﺠﻤﻮﻋﺔ ﺃﻭ‬ ‫ﺍﺿﻐﻂ‬ .<www.kenwood.com/cs/ce/> ‫ﻣﻦ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ، ﻗﻢ ﺑﺰﻳﺎﺭﺓ‬ ‫ﻣﺠﻠﺪ‬ .S / T ‫ﺍﺿﻐﻂ‬...
  • Page 52 BLUETOOTH® Bluetooth ‫ﻭﺿﻊ ﺍﺧﺘﺒﺎﺭ‬ ‫ﺇﻋﺪﺍﺩﺍﺕ ﺃﺧﺮﻯ‬ .[FUNCTION] ‫ﺍﺿﻐﻂ ﻋﻠﻰ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ‬ .‫ ﻭﺍﻟﻮﺣﺪﺓ‬Bluetooth ‫ﻳﻤﻜﻨﻚ ﻓﺤﺺ ﺍﺗﺼﺎﻝ ﺍﻟﻮﺿﻊ ﺍﻟﻤﺪﻋﻮﻡ ﺑﻴﻦ ﺟﻬﺎﺯ‬ ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﺑﻨﺪ )ﺭﺍﺟﻊ ﺍﻟﺠﺪﻭﻝ ﺍﻟﺘﺎﻟﻲ(، ﺛﻢ ﺍﺿﻐﻂ‬ .‫ ﻣﻘﺎﺭﻥ‬Bluetooth ‫• ﺗﺄﻛﺪ ﻣﻦ ﻋﺪﻡ ﻭﺟﻮﺩ ﺟﻬﺎﺯ‬ .‫ﺍﻟﻘﺮﺹ‬...

  • Page 53: General

    BLUETOOTH® ‫ﺍﺟﺮﺍﺀ ﻣﻜﺎﻟﻤﺔ ﺑﻮﺍﺳﻄﺔ ﻣﻴﺰﺓ ﺍﻟﺘﻌﺮﻑ ﻋﻠﻰ ﺍﻟﺼﻮﺕ‬ (.PBAP ‫)ﻗﺎﺑﻞ ﻟﻠﺘﻄﺒﻴﻖ ﻓﻘﻂ ﺍﺫﺍ ﻛﺎﻥ ﺍﻟﻬﺎﺗﻒ ﻳﺪﻋﻢ‬ PHONE BOOK ‫ﻟﺘﻨﺸﻴﻂ ﻣﻴﺰﺓ ﺍﻟﺘﻌﺮﻑ ﻋﻠﻰ‬ ‫ﺍﺿﻐﻂ ﻣﻊ ﺍﻻﺳﺘﻤﺮﺍﺭ ﺑﺎﻟﻀﻐﻂ ﻋﻠﻰ‬ ‫1 ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﺑﺴﺮﻋﺔ ﻟﻠﺪﺧﻮﻝ ﻓﻲ ﻭﺿﻊ ﺍﻟﺒﺤﺚ ﺣﺴﺐ ﺍﻟﺤﺮﻭﻑ‬ .‫ﺍﻟﺼﻮﺕ ﻟﻠﻬﺎﺗﻒ ﺍﻟﻤﻮﺻﻮﻝ‬ .(‫ﺍﻻﺑﺠﺪﻳﺔ...
  • Page 54 BLUETOOTH® ‫ﺗﺤﺴﻴﻦ ﺟﻮﺩﺓ ﺍﻟﺼﻮﺕ‬ XX :‫ﺍﻓﺘﺮﺍﺿﻲ‬ ...‫ﺃﺛﻨﺎﺀ ﺍﻟﺘﺤﺪﺙ ﻓﻲ ﺍﻟﻬﺎﺗﻒ‬ SETTINGS .[FUNCTION] ‫ﺍﺿﻐﻂ ﻋﻠﻰ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ‬ ‫1 ﺇﻟﻰ 03: ﺗﺮﺩ ﺍﻟﻮﺣﺪﺓ ﻋﻠﻰ ﺍﻟﻤﻜﺎﻟﻤﺔ ﺍﻟﻮﺍﺭﺩﺓ ﺗﻠﻘﺎﺋﻴ ﺎ ﹰ ﻓﻲ ﺍﻟﻮﻗﺖ ﺍﻟﻤﺤﺪﺩ‬ ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﺑﻨﺪ )ﺭﺍﺟﻊ ﺍﻟﺠﺪﻭﻝ ﺍﻟﺘﺎﻟﻲ(، ﺛﻢ‬ AUTO ANSWER .‫: ﺍﻟﻐﺎﺀ‬OFF ‫)ﻓﻲ...
  • Page 55 BLUETOOTH® ‫ — ﻫﺎﺗﻒ ﻣﺤﻤﻮﻝ‬BLUETOOTH ‫ﻋﻠﻰ ﻭﺣﺪﺓ ﺍﻟﺘﺤﻜﻢ‬ ‫ﻋﻠﻰ ﻏﻄﺎﺀ ﺍﻟﺤﻤﺎﻳﺔ‬ ‫ﺇﻟﻰ‬ ‫ﻋﻦ ﺑﻌﺪ‬ ...‫ﺍﺛﻨﺎﺀ ﺍﻟﺮﺩ ﻋﻠﻰ ﺍﻭﻝ ﻣﻜﺎﻟﻤﺔ ﻭﺍﺭﺩﺓ‬ ‫ﺍﻻﺟﺎﺑﺔ ﻋﻠﻰ‬ ‫ﺍﺿﻐﻂ‬ ‫ﺍﺿﻐﻂ‬ ‫ﺍﻟﻤﻜﺎﻟﻤﺔ ﺍﻟﻮﺍﺭﺩﺓ‬ ‫ﺍﻻﺧﺮﻯ ﺩﻭﻥ ﻗﻄﻊ‬ ‫ﺍﻟﻤﻜﺎﻟﻤﺔ ﺍﻟﺤﺎﻟﻴﺔ‬ ‫ﺍﺿﻐﻂ‬ ‫ﺭﻓﺾ ﺍﻟﻤﻜﺎﻟﻨﺔ‬ ‫ﺍﺿﻐﻂ‬ ‫ﺍﻟﻮﺍﺭﺩﺓ ﺍﻻﺧﺮﻯ‬ ‫ﺗﻠﻘﻲ ﻣﻜﺎﻣﻠﺔ‬ ...‫ﻋﻨﺪﻣﺎ ﺗﻜﻮﻥ ﻟﺪﻳﻚ ﻣﻜﺎﻟﻤﺘﻴﻦ ﻓﻌﺎﻟﺘﻴﻦ‬ ‫ﺍﺿﻐﻂ‬...
  • Page 56 .‫ﺍﺿﻐﻂ ﻋﻠﻰ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺒﺪﺀ ﺍﻹﻗﺮﺍﻥ‬ (17 ) .[ON] ‫[ ﻣﻀﺒﻮﻁ ﻋﻠﻰ ﻭﺿﻊ‬AUTO PAIRING] – ‫ ) 8( ﻭﺗﻢ‬Android ‫ ﻣﺜﺒﺖ ﻋﻠﻰ ﺟﻬﺎﺯ ﺍﻧﺪﺭﻭﻳﺪ‬KENWOOD MUSIC PLAY ‫– ﺍﻟﺘﻄﺒﻴﻖ‬ .‫“ ﻋﻨﺪ ﺍﻻﻧﺘﻬﺎﺀ ﻣﻦ ﺍﻻﻗﺘﺮﺍﻥ‬PAIRING OK” ‫ﺗﻈﻬﺮ‬ (9 ) .[BROWSE MODE] ‫ﺍﺧﺘﻴﺎﺭ‬...
  • Page 57 BLUETOOTH® Spotify ‫ — ﺍﻟﺘﻮﺻﻴﻞ‬BLUETOOTH ‫ﺍﻟﺒﺤﺚ ﻋﻦ ﺍﻏﻨﻴﺔ ﺍﻭ ﻣﺤﻄﺔ‬ ‫ ﺍﻟﻤﺪﻋﻮﻣﺔ‬Bluetooth ‫ﺃﻭﺿﺎﻉ‬ ‫ﺍﺿﻐﻂ‬ .‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﻧﻮﻉ ﺍﻟﻘﺎﺋﻤﺔ، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ ﺍﻟﻘﺮﺹ‬ (HFP) ‫– ﻭﺿﻊ ﻋﺪﻡ ﺍﺳﺘﺨﺪﺍﻡ ﺍﻟﻴﺪﻳﻦ‬ (A2DP) ‫– ﻭﺿﻊ ﺗﻮﺯﻳﻊ ﺍﻟﺼﻮﺕ ﺍﻟﻤﺘﻘﺪﻡ‬ .Spotify ‫ﺗﺨﺘﻠﻒ ﺍﻧﻮﺍﻉ ﺍﻟﻘﻮﺍﺋﻢ ﺍﻟﻤﻌﺮﻭﺿﺔ ﺑﻨﺎﺀﺍ ﻋﻠﻰ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ ﺍﻟﻤﺮﺳﻠﺔ ﻣﻦ‬ ‫...
  • Page 58 Spotify :‫ﺍﻟﺘﺤﻀﻴﺮ‬ ‫ﻋﻠﻰ ﻭﺣﺪﺓ ﺍﻟﺘﺤﻜﻢ‬ ‫ﻋﻠﻰ ﻏﻄﺎﺀ ﺍﻟﺤﻤﺎﻳﺔ‬ ‫ﺇﻟﻰ‬ ‫(، ﺛﻢ ﻗﻢ‬iPod touch/iPhone) ‫ ﻋﻠﻰ ﺟﻬﺎﺯﻙ‬Spotify ‫ﻗﻢ ﺑﺘﺜﺒﻴﺖ ﺃﺣﺪﺙ ﺇﺻﺪﺍﺭ ﻣﻦ ﺗﻄﺒﻴﻖ‬ ‫ﻋﻦ ﺑﻌﺪ‬ .Spotify ‫ﺑﺈﻧﺸﺎﺀ ﺣﺴﺎﺏ ﻭﺗﺴﺠﻴﻞ ﺍﻟﺪﺧﻮﻝ ﺇﻟﻰ‬ .‫ﺑﺘﻜﺮﺍﺭ‬ ‫ﺍﺿﻐﻂ‬ ‫ﺗﻜﺮﺍﺭ ﺍﻟﺘﺸﻐﻴﻞ‬ (5 ) .[SOURCE SELECT] ‫[ ﻓﻲ‬SPOTIFY SRC] ‫[ ﻟـ‬ON] ‫• ﺣﺪﺩ‬ /REPEAT ONE * /REPEAT ALL ( ‫) ﻏﻴﺮ...
  • Page 59 ‫ﻛﺮﺭ ﺍﻟﺨﻄﻮﺍﺕ ﻣﻦ‬ :‫ﺍﻟﺘﺤﻀﻴﺮ‬ ،ANDROID ‫ ﺃﻭ‬iPod USB ‫%5.0 /%1/%5/%01: ﺍﺛﻨﺎﺀ ﺍﻻﺳﺘﻤﺎﻉ ﻟﻤﺼﺪﺭ‬ ‫ ﻋﻠﻰ ﺟﻬﺎﺯ ﻙ ﻗﺒﻞ ﺍﻟﺘﻮﺻﻴﻞ. ﻟﻤﺰﻳﺪ‬KENWOOD Remote ‫ﻗﻢ ﺑﺘﺜﺒﻴﺖ ﺍﺣﺪﺙ ﺍﺻﺪﺍﺭ ﻣﻦ ﺍﻟﺘﻄﺒﻴﻖ‬ SKIP SEARCH .‫ﻳﺨﺘﺎﺭ ﻧﺴﺒﺔ ﺑﺤﺚ ﺍﻟﺘﺨﻄﻲ ﻟﺠﻤﻴﻊ ﺍﻟﻤﻠﻔﺎﺕ‬ .<www.kenwood.com/cs/ce/> ‫ﻣﻦ ﺍﻟﻤﻌﻠﻮﻣﺎﺕ، ﻗﻢ ﺑﺰﻳﺎﺭﺓ‬...
  • Page 60 ‫ ﻣﻦ ﻫﺬﺍ ﺍﻟﺠﻬﺎﺯ ﻋﺒﺮ ﺗﻄﺒﻴﻖ‬Android ‫ : ﻗﻢ ﺑﺎﻟﺘﺤﻜﻢ ﺑﺠﻬﺎﺯ‬BROWSE MODE ([SKIP SEARCH] ،10 ) .Android ‫ ﺍﻟﻤﺜﺒﺖ ﻓﻲ ﺟﻬﺎﺯ‬KENWOOD MUSIC PLAY .%10 ‫ ﻳﺆﺩﻱ ﺍﻟﻰ ﺍﻟﺒﺤﺚ ﺑﻤﻌﺪﻝ‬S / T ‫• ﺍﻟﻀﻐﻂ ﻣﻊ ﺍﺳﺘﻤﺮﺍﺭ ﺍﻟﻀﻐﻂ ﻋﻠﻰ ﺍﻟﺰﺭ‬ ‫ ﻧﻔﺴﻪ ﻋﺒﺮ‬Android ‫ ﺑﺎﺳﺘﺨﺪﺍﻡ ﺟﻬﺎﺯ‬Android ‫: ﻗﻢ ﺑﺎﻟﺘﺤﻜﻢ ﺑﺠﻬﺎﺯ‬...
  • Page 61 ‫ : ﻧﻮﻉ ﺍﻻﺿﺎﺀﺓ‬KCA-iP103 ،‫ : ﺍﻟﻨﻮﻉ 03 ﺩﺑﻮﺱ‬KCA-iP102 * .‫* ﻻ ﺗﺘﺮﻙ ﺍﻟﻜﺎﺑﻞ ﺑﺪﺍﺧﻞ ﺍﻟﺴﻴﺎﺭﺓ ﻋﻨﺪ ﻋﺪﻡ ﺍﺳﺘﺨﺪﺍﻣﻪ‬ ‫“. ﺍﺗﺒﻊ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ‬Press [VIEW] to install KENWOOD MUSIC PLAY APP” ‫، ﻳﺘﻢ ﻋﺮﺽ‬Android ‫* ﻋﻨﺪ ﺗﻮﺻﻴﻞ ﺟﻬﺎﺯ‬ ANDROID ‫ ﻗﺒﻞ‬Android ‫ ﻋﻠﻰ ﺟﻬﺎﺯ‬KENWOOD MUSIC PLAY ‫ﻟﺘﻨﺼﻴﺐ ﺍﻟﺘﻄﺒﻴﻖ. ﻛﻤﺎ ﻳﻤﻜﻦ ﺗﺮﻛﻴﺐ ﺍﺣﺪﺙ ﺍﺻﺪﺍﺭ ﻣﻦ ﺍﻟﺘﻄﺒﻴﻖ‬...
  • Page 62 ‫ﺭﺍﺩﻳﻮ‬ :‫ﺍﻟﺘﺤﻀﻴﺮ‬ ‫1 ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﻧﻮﻉ ﺍﻟﺒﺮﻧﺎﻣﺞ ﺍﻟﻤﺘﺎﺡ، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ‬ PTY SEARCH (5 ) .[SOURCE SELECT] ‫[ ﻟـ‬BUILT-IN AUX] ‫[ ﻟـ‬ON] ‫ﺣﺪﺩ‬ .‫ﺍﻟﻘﺮﺹ‬ /FRENCH/ENGLISH) PTY ‫2 ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﻟﻐﺔ‬ ‫ﺑﺪﺀ ﺍﻻﺳﺘﻤﺎﻉ‬ .‫(، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ ﺍﻟﻘﺮﺹ‬GERMAN .‫...
  • Page 63 ‫ﺭﺍﺩﻳﻮ‬ ‫ﺇﻋﺪﺍﺩﺍﺕ ﺃﺧﺮﻯ‬ .[FUNCTION] ‫ﺍﺿﻐﻂ ﻋﻠﻰ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ‬ ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﺑﻨﺪ )ﺭﺍﺟﻊ ﺍﻟﺠﺪﻭﻝ ﺍﻟﺘﺎﻟﻲ(، ﺛﻢ ﺍﺿﻐﻂ‬ .‫ﺍﻟﻘﺮﺹ‬ ‫ﺍﻟﻰ ﺍﻥ ﻳﺘﻢ ﺍﺧﺘﻴﺎﺭ ﺍﻟﺒﻨﺪ ﺍﻟﻤﺮﻏﻮﺏ ﺍﻭ ﺍﺗﺒﻊ ﺍﻟﺘﻌﻠﻴﻤﺎﺕ‬ ‫ﻛﺮﺭ ﺍﻟﺨﻄﻮﺓ‬ .‫ﺍﻟﻤﺘﻌﻠﻘﺔ ﺑﺎﻟﺒﻨﺪ ﺍﻟﻤﺨﺘﺎﺭ‬ .‫ﻣﻦ ﺃﺟﻞ ﺍﻹﻧﻬﺎﺀ‬ ‫ﺍﺿﻐﻂ...
  • Page 64 ‫ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺗﻔﺎﺻﻴﻞ ﺣﻮﻝ ﻛﻴﻔﻴﺔ ﺗﺤﺪﻳﺚ ﺍﻟﺒﺮﻧﺎﻣﺞ ﺍﻟﺜﺎﺑﺖ، ﻗﻢ ﺑﺰﻳﺎﺭﺓ‬ ‫ ﺍﻟﻰ ﻟﻮﻥ ﺍﺑﻴﺾ. ؛‬LCD DISPLAY ‫: ﺗﺘﻐﻴﺮ ﺍﺿﺎﺀﺓ‬ON xxxx .<www.kenwood.com/cs/ce/> .[COLOR SELECT] ‫ ﺑﻨﻔﺲ ﻟﻮﻥ‬LCD DISPLAY ‫: ﺗﻈﻞ ﺇﺿﺎﺀﺓ‬OFF ‫ : ﻳﻌﻴﺪ ﺍﻹﻋﺪﺍﺩﺍﺕ ﺍﻟﻰ ﺍﻹﻋﺪﺍﺩﺍﺕ ﺍﻻﻓﺘﺮﺍﺿﻴﺔ )ﺑﺎﺳﺘﺜﻨﺎﺀ ﺍﻟﻤﺤﻄﺎﺕ ﺍﻟﻤﺨﺰﻧﺔ(. ؛‬YES...
  • Page 65 ‫ﺍﻟﺸﺮﻭﻉ ﻓﻲ ﺍﻟﻌﻤﻞ‬ ‫ﺿﺒﻂ ﺍﻟﺴﺎﻋﺔ ﻭ ﺍﻟﺘﺎﺭﻳﺦ‬ .[FUNCTION] ‫ﺍﺿﻐﻂ ﻋﻠﻰ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﻠﺪﺧﻮﻝ ﺇﻟﻰ‬ .‫[، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ ﺍﻟﻘﺮﺹ‬CLOCK] ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ‬ ‫ﻟﻀﺒﻂ ﺍﻟﺴﺎﻋﺔ‬ ‫[، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ‬CLOCK ADJUST] ‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ‬ .‫ﺍﻟﻘﺮﺹ‬ .‫ﺃﺩﺭ ﻗﺮﺹ ﻣﺴﺘﻮﻯ ﺍﻟﺼﻮﺕ ﻟﺘﺤﺪﻳﺪ ﺍﻹﻋﺪﺍﺩﺍﺕ، ﺛﻢ ﺍﺿﻐﻂ ﻋﻠﻰ ﺍﻟﻘﺮﺹ‬ ‫ﺣﺪﺩ...
  • Page 66 ‫ﺃ ﹶ ﺳﺎﺳ ﹺ ﻴ ﹼ ﺎﺕ‬ (RC-406) ‫ﺭﻳﻤﻮﺕ ﺍﻟﺘﺤﻜﻢ‬ ‫ﻭﺍﺟﻬﺔ ﺍﻟﺠﻬﺎﺯ‬ ‫ﺗﻮﺻﻴﻞ‬ ‫ﺣﺴﺎﺱ ﺍﻟﺘﺤﻜﻢ ﻋﻦ ﺑﻌﺪ‬ ‫)ﺗﺠﻨﺐ ﺍﻟﺘﻌﺮﻳﺾ ﻟﻀﻮﺀ ﺍﻟﺸﻤﺲ‬ ‫ﻗﺮﺹ ﻣﺴﺘﻮﻯ‬ ‫ﻳﻀﻲﺀ ﺍﻟﺮﻣﺰ ﻋﻨﺪ ﺇﻧﺸﺎﺀ ﺍﺗﺼﺎﻝ‬ (.‫ﺍﻟﺴﺎﻃﻊ‬ ‫ﺍﻟﺼﻮﺕ‬ (13 ) .Bluetooth ‫ﺑﻠﻮﺗﻮﺙ‬ ‫ﻧﺎﻓﺬﺓ ﺍﻟﻌﺮﺽ‬ ‫ﻓﺼﻞ‬ ‫ﻗﻢ ﺑﺴﺤﺐ ﻏﻄﺎﺀ‬ ‫ﻋﺎﺯﻝ...
  • Page 67 ‫ﺍﻟﻤﺤﺘﻮﻳﺎﺕ‬ ‫ﻗﺒﻞ ﺍﻻﺳﺘﺨﺪﺍﻡ‬ ‫ﻗﺒﻞ ﺍﻻﺳﺘﺨﺪﺍﻡ‬ ‫ﻫﺎﻡ‬ ‫ﺃ ﹶ ﺳﺎﺳ ﹺ ﻴ ﹼ ﺎﺕ‬ ‫• ﻟﻀﻤﺎﻥ ﺍﻻﺳﺘﺨﺪﻟﻢ ﺍﻟﻤﻨﺎﺳﺐ، ﻳﺮﺟﻰ ﻗﺮﺍﺀﺓ ﻫﺬﺍ ﺍﻟﺪﻟﻴﻞ ﺑﺘﻤﻌﻦ ﻗﺒﻞ ﺍﺳﺘﺨﺪﺍﻡ ﻫﺬﺍ ﺍﻟﻤﻨﺘﺞ. ﻣﻦ ﺍﻟﻤﻬﻢ ﺟﺪﺍ ﺍﻥ ﺗﻘﺮﺃ ﻭﺗﺮﺍﻗﺐ ﺍﻟﺘﺤﺬﻳﺮﺍﺕ‬ .‫ﻭﺍﻟﺘﻨﺒﻴﻬﺎﺕ ﺍﻻﺣﺘﻴﺎﻃﻴﺔ ﻓﻲ ﻫﺬﺍ ﺍﻟﺪﻟﻴﻞ‬ ‫ﺍﻟﺸﺮﻭﻉ ﻓﻲ ﺍﻟﻌﻤﻞ‬ .‫•...
  • Page 68 KDC-X5200BTM...

Table of Contents